SEALANTS & ADHESIVES - CH Reed Inc.

Precision Dose
Dispense System
2K EQUIPMENT ❚ SEALANTS AND ADHESIVES EQUIPMENT
Booster Feed Module Selection (Code B)
The booster feed module is available for use with a 20
fluid oz (600 ml) sausage pack pressure tube (S) or or a
5 gal. (19 liter) pail pump (P). The material feed module
determines which booster feed module you should select:
the 20 fluid oz (600 ml) feed module is recommended for
use with the 5 gal. (19 liter) supply module, and the 5 gal.
(19 liter) feed module is recommended for the 55 gal. (200
liter) supply module. Each booster feed module consists of
a booster supply, control box, dosing valve, booster stand
and the interconnecting cables, tubing and hoses.
Booster Supply
The booster supply delivers the booster paste from either
a sausage pack pressure tube or a 5 gal. (19 liter) pail
pump to the dosing valve.
Control Box
The control box contains a computer processor that
controls all aspects of the Precision Dose system. This
processor monitors the guns, encoder, adhesive and
booster low-level switches and the booster low- and
high-pressure switches. In addition, the processor controls
the booster dosing valve, dispense valve, adhesive pump
motor and the system alarms.
Dosing Valve
The dosing valve is an air-operated, positivedisplacement,
double-check valve that contains a purge
valve for loading. The solenoid is direct-mounted for
high-speed cycling. The valves outlet manifold is
equipped with high- and low-pressure switches, a
pressure gauge, ratio check assembly and selector valves.
GRACO
(S) - 20 fluid oz (600 ml) sausage pack feed
(P) - 5 gal. (19 liter) pail feed
173
4