SEALANTS & ADHESIVES - CH Reed Inc.

2K EQUIPMENT ❚ SEALANTS AND ADHESIVES EQUIPMENT
Fluid Mixers
Mixers for Two-Part Materials
Gun Inlet Mixers
Flexible Mixers For Low to High Viscosity
Part Number 948315 948097 948208
Number of Elements 24 36 48
Element Diameter* 1/2 in. (12.7 cm) 1/2 in. (12.7 cm) 1/2 in. (12.7 cm)
Element Material Plastic Plastic Plastic
Housing Material Nylon Hose Nylon Hose Nylon Hose
Max. Working Pressure PSI (bar) 3500 (238) 3500 (238) 3500 (238)
Length 16.9" (42.9 cm) 21.8" (55.4 cm) 27.7" (70.4 cm)
Hose Inlet/Outlet 1/2" npt(m) 1/2" npt(m) 1/2" npt(m)
*Elements are not removable.
Part Number 948081
Number of Elements 36
Element Diameter* 1/2 in. (12.7 cm)
Element Material* Plastic
Housing Material Aluminum
Max. Working Pressure PSI (bar) 3000 (204)
Length in Inches (cm) 7.8 (19.8)
Inlet/Outlet 1/2" npt(mxf)
* Elements (512-519) are removable.
GRACO
These mixers consist of a number of mix elements permanently assembled into a specially-designed nylon core hose.
Flexible mixers provide high pressure capabilities in a low cost package.
Tri-Core Mixers For Low to High Viscosity
These mixers have three internal passages connected within the end caps that create a serpentine flow path. This path,
even though short in length, provides high mixing capabilities.
227
4