SEALANTS & ADHESIVES - CH Reed Inc.

4
158
GRACO SEALANTS AND ADHESIVES EQUIPMENT ❚ 2K EQUIPMENT
Hydra-Mate
Plural-Component Proportioning / Dispensing Unit
Ratio Check Kit (Code E)
Ratio check kits attach to the ratio check valves on the
proportioner outlet blocks. These kits provide restriction
on the pumps, which simulates the pressure and flow rate
normally experienced when dispensing through a mixer
and gun. Without the proper restriction the pumps will
run continuously and not give accurate ratio checks. The
same ratio kit is used for all materials.
Accessories
222101 Standard packing repair kit
686604 “Block Stack” packing kit
Allows pump to run at lower input air pressures
512613 Rupure Discs
Burst if catalyst fluid pressure becomes too high.
236726 T-Wiper kit
Spare catalyst injector valves
These are restrictive check valves used to create back pressure
on the catalyst. Use the chart below to select the recommended
valves:
Part # Typically Size Used
Used With Code on Gun Kits
948291 Polysulfide 0.125 in 570184
948258 Silicone # 35/0.110 in 570294, 570383,
570304
947937 Urethane # 40/0.090 in 570295, 570384
570251 Urethane # 42/0.085 in 570225
Reference Material
309000 2K Ultra-Lite Instruction Manual
308253 Ultra-Lite 6000 Valve Instruction Manua
684038 Configurator order form
307982 Displacement Pump Instruction Manual