Software manual for use with color sensors of the Series - Silicann
Software manual for use with color sensors of the Series - Silicann
Software manual for use with color sensors of the Series - Silicann
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User Manual<br />
PCS Sensor <strong>S<strong>of</strong>tware</strong><br />
Processing mode Description<br />
Figure 10 shows spherical tolerances and a measured <strong>color</strong> Cm that<br />
is <strong>with</strong>in <strong>the</strong> tolerance C3 and hence was recognized as <strong>the</strong> <strong>color</strong> C3.<br />
CHECK CYL. The mode CHECK CYL. (cylindrical) provides a method <strong>for</strong><br />
assigning cylindrical tolerance spaces. Tolerance parameters can be<br />
configured separately <strong>for</strong> <strong>color</strong> and brightness. The measurement<br />
principle is shown in Figure 11. Two tolerance parameters (<strong>color</strong><br />
and brightness tolerance) are necessary. This mode can not be<br />
applied in <strong>the</strong> XYZ <strong>color</strong> space beca<strong>use</strong> <strong>the</strong>re is no coordinate <strong>for</strong><br />
brightness.<br />
Figure 9: Color classification principle<br />
Rev. 5.1 (2009-01-28) Subject to change<br />
22-3061-01 - 10 -