Software manual for use with color sensors of the Series - Silicann
Software manual for use with color sensors of the Series - Silicann
Software manual for use with color sensors of the Series - Silicann
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User Manual<br />
PCS Sensor <strong>S<strong>of</strong>tware</strong><br />
0x12: Set Serial Burst Mode<br />
Send: 1 word<br />
0: Burst Mode <strong>of</strong>f<br />
1: Burst 2F<br />
2: Burst 3F<br />
3: Burst 4F<br />
4: Burst 5F<br />
5: Burst 6F<br />
Response:<br />
Word 0: difference between two burst packages in us<br />
Word 1: (and following) requested data<br />
Note: For more in<strong>for</strong>mation about <strong>the</strong> burst mode feature please refer to chapter 2.1.1.<br />
0x13: Set USB-Burst Mode 10<br />
like 0x12, only <strong>for</strong> USB<br />
2.2.3 Data Acquisition<br />
0x20 : Set Acquisition Mode<br />
Send: 1 word<br />
0: no acquisition<br />
1: active light internal triggered<br />
2: passive light internal triggered<br />
3: active light external triggered<br />
4: passive light external triggered<br />
5: active light external triggered inverted<br />
6: passive light external triggered inverted<br />
0x21 : Read Acquisition Mode<br />
Response: 1 word (like 0x20)<br />
0x22 : Set Transimpedance Amplification 11<br />
Send: 1 word<br />
0: Amplification factor 1<br />
1: Amplification factor 5<br />
2: Amplification factor 25<br />
3: Amplification factor 100<br />
0x23 : Read Transimpedance Amplification 11<br />
Response: 1 word (like 0x22)<br />
0x24 : Set Illuminating Intensity 11<br />
10 Only available <strong>for</strong> <strong>sensors</strong> <strong>with</strong> USB port.<br />
11 This function is only available <strong>for</strong> PCS-II <strong>sensors</strong>.<br />
Rev. 5.1 (2009-01-28) Subject to change<br />
22-3061-01 - 32 -