Download - Brunswick

In order to make the New Pins Solenoid actuate on a foul, the following
signals must occur:
1. First ball.
2. Foul signal.
3. Ball detect.
If the signals are present, the New Pins Solenoid will be energized two times
during the pinsetter cycle. At 44° the New Pins Solenoid will energize causing
the pinsetter to switch to second ball and sweep all standing pins. It energizes
again at 0° causing the pinsetter to switch to second ball to give the bowler a
full rack, second ball shot.
For third ball, tenth frame, the New Pins Solenoid will fire one time at 0 o after
a tenth frame spare or a “double.” This will automatically put the pinsetter in
a second ball mode for the final ball of the game.
For No Tap situations the New Pins Solenoid energizes at 44° causing the
pinsetter to switch to second ball, sweep all pins from the pin deck, and reset
to a full rack first ball for the next bowler.
Video Pinsensing System 23