Download - Brunswick

AMF Pinspotter Scoring Sequence of Events
First Ball, Second Ball
All Models
The following describes the events necessary for the first ball scoring
sequence.
NOTE: The scorer console must be turned on, the bowler's name entered, and
the “Bowl” key pressed with the sequencing arrows on the bowler's name.
1. The bowler delivers the first ball. The ball breaks the ball detect's light
path and sends a signal to the VPS.
2. The VPS starts the scoring process.
3. The pinsetter is triggered by the ball. The sweep falls downward causing
the sweep switch to to send a take data signal to the VPS.
4. The VPS waits the time desired as set in the take data delay time setting
under the configuration menu.
5. After the time delay the VPS takes a picture and sends the score to the
LGP.
6. Score is displayed on CRTs.
7. The sweep switch closes to reset scoring cycle allowing the VPS to accept
another ball detect.
AMF Foul
On first ball foul, the data is transmitted to the Scanner Data Processor PCB.
At “take data” (44 o ), the scorer displays an “F” and scores a “0.” The normal
foul cycle of the pinspotter sets a new full set of pins for the second ball cycle.
Video Pinsensing System 33