Download - Brunswick

3rd Ball 10th Frame
All Models
The following describes the events necessary for the third ball tenth frame
scoring sequence.
This cycle occurs at the end of the tenth frame for a bowler that received a
“bonus” ball after a spare or a double. If the bowler does not strike on the
“bonus” ball, the pinspotter will cycle a second time so the next bowler is not
required to push the Reset button to get a full rack, first ball.
NOTE: The scorer console must be turned on, the bowler's name entered, and
the “Bowl” key pressed with the sequencing arrows on the bowler's name.
1. The bowler delivers the first ball. The ball breaks the ball detect's light
path and sends a signal to the VPS.
2. The VPS starts the scoring process.
3. The pinsetter is triggered by the ball. The sweep falls downward causing
the sweep switch to to send a take data signal to the VPS.
4. The VPS waits the time desired as set in the take data delay time setting
under the configuration menu.
5. After the time delay the VPS takes a picture and sends the score to the
LGP.
6. Score is displayed on CRTs.
7. The sweep switch closes to reset scoring cycle allowing the VPS to accept
another ball detect. If the bowler does not bowl a strike the VPS resets the
pinspotter.
Video Pinsensing System 35