STANDARD - Survey Instrument Antique Center!
STANDARD - Survey Instrument Antique Center!
STANDARD - Survey Instrument Antique Center!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
247<br />
NEW PARTS FOR OUR TRANSITS ANI> LEVELS LIABLE TO LOSS<br />
OR ACCIDENT.<br />
The following list of parts of our Transits and Levels can be supplied in emergency cases<br />
when it is impossible to send us the instrument. (Articles not given in this list cannot be furnished<br />
unless the instrument is sent. )<br />
NOTE- As we make many styles and sizes of instruments, a mere description in your letter of<br />
what is wanted may not be sufficient. For this reason to prevent mistakes and loss of time we<br />
always require the serial number and size of the instrument, and a rough sketch<br />
when the list below and the names given in the cross-section cut on pages 29 and GO do not<br />
indicate the parts wanted. Sending the broken pieces will also help to identify the part and the<br />
size.<br />
We cannot undertake to work by sketch or measures, and only agree to send the parts mentioned<br />
in this list to fit as near as possible without having the instrument. (If we are to do the<br />
fitting to detached parts sent to us there will be an extra charge made for such final fitting in<br />
addition to the price given in the list below.)<br />
Parts marked thus(*) can be sent to fit approximately only. In all cases where single<br />
parts sent out such as a leveling or a tangent screw fits too tightly or too loosely a competent<br />
instrument maker should make the final fitting, and it is only when too far removed from one<br />
that a good local optician, jeweller or watch maker should do it. If there is no one to make the<br />
final fitting in the town or vicinity, send us with the order the parts, such as the bracket for<br />
which the new tangent screw is required, or the leveling head for leveling screws, or level mount-<br />
ing tubes, frames for glass shades, etc., for proper fitting.<br />
Under no circumstances ever detach a standard, center, horizontal circle, verniers, or level arms,<br />
etc., from the instrument.<br />
Before ordering an article from the list below, please read Notes A. B. C. etc.,<br />
page 249.<br />
When applying any personal treatment to parts requiring care,<br />
it will be well to first read the<br />
various chapters on ' Care of our instruments," etc., on pages 10 to 22 of our Manual,<br />
which is sent out with each instrument purchased also the various notes appended to this list.<br />
Emery must never be used in any form under any circumstances for fitting as this<br />
would spoil the part treated.<br />
Parts sent to us by mail should be REGISTERED to ensure delivery.<br />
The prices below do not include registration. Add 1C cents if registration<br />
is desired.<br />
In order to avoid opening accounts for small amounts, the price, including postage, (and<br />
registration if any ) should accompany the order.<br />
NEW PARTS FOR TRANSITS<br />
SL/B/FPT Tn For illustration see page 29.<br />
WITHOUT IVOT/CE<br />
Hood: (Cravenette is supplied for Transits, unless silk is specified) .<br />
Tripod:<br />
Price Postage Code<br />
$1.00 .04 Acerb<br />
(New box cannot be supplied without having the instrument.)<br />
Plumb bobs, see page 244. For Transits No. 1 and 5 use No. 213 2.00 .12 Ache<br />
2,3,4,6 212. . 1.75 .09 Achor<br />
Plumb bob adjuster. ......... .15 .01 Acute<br />
Pocket magnifying glasses, see page 245. For all styles and sizes of<br />
Transit except No. 4 use No. 222 ... .90 .02 Adore<br />
For No. 4 use No. 221 . . . .60 .02 Aigre<br />
Set of rubber cushion* (4) for outside bottom of mahogany box .30 .02 Alcor<br />
Adjusting pins .......... .08 .01 Alpia<br />
<strong>Instrument</strong> packing piece (brass ring to screw instrument upon the slide<br />
board) 1.00 .10 Amber<br />
(For entire tripods see page 158O.)<br />
for instruments having four leveling screws<br />
' "<br />
complete with bolts, nuts and washers<br />
bolt . @$.90)<br />
nut . . . . . . @ .35 see Note C<br />
[<br />
washer 1. 2. 3. . . . .05)<br />
cap of aluminum ....<br />
leg full length, split,<br />
"<br />
extension (See Note D)<br />
shoe 1. 2. 3.<br />
V clamp for extension leg (See Note C )<br />
Tripod head (See Note B )<br />
1.50<br />
3.00<br />
4.25<br />
.35<br />
1.00<br />
.35<br />
.50<br />
.04<br />
.02<br />
.01<br />
.10<br />
Ex<br />
Ex<br />
.06<br />
.07<br />
Babel<br />
Dacca<br />
Badge<br />
Bafta*<br />
Balmy<br />
Banco<br />
Bandy<br />
Basis<br />
Baton<br />
Bavin