An Installation Pocket Reference Guide.pdf - Anixter

More documents

Recommendations

Info

4. Coaxial Cable| Step 5: Insert the sleeve ferrule and BNC body onto the coaxial cable. Firmly push the cable as far as possible or until 1⁄8 inch of the center conductor is protruding from the connector. • Make sure the connector is fully seated and the white dielectric material is firmly pushed against the inner stop of the connector. You can see this by looking into the open end of some connectors. Step 6: Insert the cable and connector into the crimping device, making sure that it is positioned firmly. Squeeze the crimper handle tightly. Use a ratcheting tool that does not release until the proper crimping displacement has been applied for the specific cabling and connector type. Once the tool releases after the final “click,” the crimp should be complete. anixter.com 45|
|4. Coaxial Cable Step 7: Inspect the connection making sure that there’s no braiding exposed and that the connector is firmly attached to the cable. |46 1.800.ANIXTER
Page 1 and 2: Products. Technology. Services. Del
Page 3 and 4: TABLE OF CONTENTS Table of Contents
Page 5 and 6: INTRODUCTION Introduction| Anixter:
Page 7 and 8: |1. Standards Reference Documents S
Page 9 and 10: |1. Standards Reference Documents A
Page 11 and 12: 2. BUILDING SUBSYSTEMS 2. Building
Page 13 and 14: 2. Building Subsystems| 1. Entrance
Page 15 and 16: Table 2.1 - Work Area Components Eq
Page 17 and 18: Application Parameter Nominal Wavel
Page 19 and 20: Star Wiring 2. Building Subsystems|
Page 21 and 22: |3. Twisted-Pair Cable SECTION 3: T
Page 23 and 24: |3. Twisted-Pair Cable Table 3.1 -
Page 25 and 26: |3. Twisted-Pair Cable Anixter’s
Page 27 and 28: |3. Twisted-Pair Cable Twisted-Pair
Page 29 and 30: |3. Twisted-Pair Cable Testing Veri
Page 31 and 32: |3. Twisted-Pair Cable Step 3: Hold
Page 33 and 34: |3. Twisted-Pair Cable Step 8: Pres
Page 35 and 36: |3. Twisted-Pair Cable Step 12: Pla
Page 37 and 38: |4. Coaxial Cable SECTION 4: COAXIA
Page 39 and 40: |4. Coaxial Cable Table 4.3 - Coaxi
Page 41 and 42: |4. Coaxial Cable F Connector • T
Page 43: |4. Coaxial Cable Step 3: Holding t
Page 47 and 48: |5. Fiber Optic Cables SECTION 5: F
Page 49 and 50: |5. Fiber Optic Cables Figure 5.5 -
Page 51 and 52: |5. Fiber Optic Cables Attachment M
Page 53 and 54: |5. Fiber Optic Cables Testing Figu
Page 55 and 56: |5. Fiber Optic Cables Step 2: Meas
Page 57 and 58: |5. Fiber Optic Cables Step 7: Care
Page 59 and 60: |5. Fiber Optic Cables Step 11: Slo
Page 61 and 62: |5. Fiber Optic Cables Step 16: Mak
Page 63 and 64: |5. Fiber Optic Cables Step 20: Clo
Page 65 and 66: |5. Fiber Optic Cables Step 24: The
Page 67 and 68: |6. Conduit, Cable Basket and Ladde
Page 69 and 70: 7. Administration| 7. ADMINISTRATIO
Page 71 and 72: 7. Administration| Class 2 Administ
Page 73 and 74: |8. About Anixter SECTION 8: ABOUT
Page 75 and 76: |8. About Anixter Our Technical Exp
Page 77 and 78: |8. About Anixter Supply Chain Solu
Page 79: 12H0014X00 © 2013 Anixter Inc. •

An Installation Pocket Reference Guide.pdf - Anixter

Create successful ePaper yourself

Delete template?

Save as template?