An Installation Pocket Reference Guide.pdf - Anixter
An Installation Pocket Reference Guide.pdf - Anixter
An Installation Pocket Reference Guide.pdf - Anixter
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
|1. Standards <strong>Reference</strong> Documents<br />
SECTION 1: STANDARDS REFERENCE DOCUMENTS<br />
Standards <strong>Reference</strong> Documents<br />
Table 1.1 Standards <strong>Reference</strong> Documents<br />
Telecommunications standards provide recommended best practices for the design<br />
and installation of cabling systems to support a wide variety of existing and future<br />
systems to extend the life span of the telecommunications infrastructure.<br />
Standard Description<br />
ANSI/TIA-568-C.0 Generic Telecommunications Cabling<br />
for Customer Premises<br />
ANSI/TIA-568-C.1 Commercial Building<br />
Telecommunications Cabling Standard<br />
ANSI/TIA-568-C.2 Balanced Twisted Pair<br />
Telecommunications Cabling and<br />
Components Standard<br />
ANSI/TIA-568-C.3 Optical Fiber Cabling Components<br />
ANSI/TIA-569-B Commercial Building Standard<br />
for Telecommunications Pathways<br />
and Spaces<br />
ANSI/TIA-606-A Administration Standard for the<br />
Telecommunications Infrastructure<br />
of Commercial Buildings<br />
J-STD-607-A This standard specifies uniform<br />
telecommunications grounding and<br />
bonding infrastructures that should be<br />
followed within commercial buildings.<br />
ANSI/TIA-942-A Telecommunications Infrastructure<br />
Standard for Data Centers<br />
IEEE 802.3af This standard specifies data terminal<br />
equipment (DTE) power via media<br />
dependent interface (MDI).<br />
The specification calls for power<br />
source equipment that operates<br />
at 48 volts of direct current for<br />
12.95 watts of power over unshielded<br />
twisted-pair cable to data terminal<br />
equipment 100 meters away.<br />
Continued on next page >><br />
|6 1.800.ANIXTER