An Installation Pocket Reference Guide.pdf - Anixter

More documents

Recommendations

Info

Step 18: With the connector oriented up, load the connector into the tool by inserting it (lead-in tube first), into the wrench. Slowly release the load button while guiding the connector into the connector cradle. Step 19: Slide the VFL coupler down until the ferrule adapter is seated on the connector. 5. Fiber Optic Cables| anixter.com 63|
|5. Fiber Optic Cables Step 20: Close the cover and check for the error light. If the error light remains off, there are no problems. Insert the cleaved fiber into the back of the lead-in tube. Insert the fiber until you feel it firmly stop against the fiber stub. The visual mark should be within 2 mm of the lead-in tube. While maintaining enough inward pressure, squeeze the CAM button in until it locks. Check the termination lights. If the green light is illuminated, the termination was successful. If the red light is illuminated, press the reset button, remove the fiber and repeat the termination process. Step 21: Turn the crimp knob 180 degrees in either direction to crimp and lock the connector into the fiber. |64 1.800.ANIXTER
Page 1 and 2:
Products. Technology. Services. Del
Page 3 and 4:
TABLE OF CONTENTS Table of Contents
Page 5 and 6:
INTRODUCTION Introduction| Anixter:
Page 7 and 8:
|1. Standards Reference Documents S
Page 9 and 10:
|1. Standards Reference Documents A
Page 11 and 12: 2. BUILDING SUBSYSTEMS 2. Building
Page 13 and 14: 2. Building Subsystems| 1. Entrance
Page 15 and 16: Table 2.1 - Work Area Components Eq
Page 17 and 18: Application Parameter Nominal Wavel
Page 19 and 20: Star Wiring 2. Building Subsystems|
Page 21 and 22: |3. Twisted-Pair Cable SECTION 3: T
Page 23 and 24: |3. Twisted-Pair Cable Table 3.1 -
Page 25 and 26: |3. Twisted-Pair Cable Anixter’s
Page 27 and 28: |3. Twisted-Pair Cable Twisted-Pair
Page 29 and 30: |3. Twisted-Pair Cable Testing Veri
Page 31 and 32: |3. Twisted-Pair Cable Step 3: Hold
Page 33 and 34: |3. Twisted-Pair Cable Step 8: Pres
Page 35 and 36: |3. Twisted-Pair Cable Step 12: Pla
Page 37 and 38: |4. Coaxial Cable SECTION 4: COAXIA
Page 39 and 40: |4. Coaxial Cable Table 4.3 - Coaxi
Page 41 and 42: |4. Coaxial Cable F Connector • T
Page 43 and 44: |4. Coaxial Cable Step 3: Holding t
Page 45 and 46: |4. Coaxial Cable Step 7: Inspect t
Page 47 and 48: |5. Fiber Optic Cables SECTION 5: F
Page 49 and 50: |5. Fiber Optic Cables Figure 5.5 -
Page 51 and 52: |5. Fiber Optic Cables Attachment M
Page 53 and 54: |5. Fiber Optic Cables Testing Figu
Page 55 and 56: |5. Fiber Optic Cables Step 2: Meas
Page 57 and 58: |5. Fiber Optic Cables Step 7: Care
Page 59 and 60: |5. Fiber Optic Cables Step 11: Slo
Page 61: |5. Fiber Optic Cables Step 16: Mak
Page 65 and 66: |5. Fiber Optic Cables Step 24: The
Page 67 and 68: |6. Conduit, Cable Basket and Ladde
Page 69 and 70: 7. Administration| 7. ADMINISTRATIO
Page 71 and 72: 7. Administration| Class 2 Administ
Page 73 and 74: |8. About Anixter SECTION 8: ABOUT
Page 75 and 76: |8. About Anixter Our Technical Exp
Page 77 and 78: |8. About Anixter Supply Chain Solu
Page 79: 12H0014X00 © 2013 Anixter Inc. •
show all

An Installation Pocket Reference Guide.pdf - Anixter

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?