Bushland Weeds Manual - Environmental Weeds Action Network

Chapter 5 Annual Broadleaf Herbs, Sedges and Succulents Weed Management Table
Suggested methods of management and control Similar natives
often mistaken
for weeds
Colonises bare soil and disturbed sites. Lontrel ® 6 mL/10 L (300 mL/ha) in early growth stages. Glyphosate 0.2 % will control
at all growth stages.
Reference
146, 53, 96, 115, 101,
167, 242, 222
Colonises disturbed wetlands. Hand remove isolated plants before seed set. Spot spray 0.2 % glyphosate. 167, 242, 222
300, 207, 167, 242
Seedlings establish in bare open ground so establish desirable vegetation cover. Hand remove isolated plants through spring
and early summer. Glyphosate applied with a rope wick provides good control or spot spray Lontrel®10 ® mL in 10 L water
+ 25 mL wetting agent. Control at rosette stage.
300, 248, 91, 121, 228,
167, 242
as for Slender Thistle 300, 248, 91, 228, 167,
242
as for Slender Thistle 300, 248, 96, 147, 251,
145, 120, 228, 167, 242
Hand remove small populations. Spray metsulfuron methyl 0.1 g/15 L (2 g/ha) + wetting agent. 300, 101, 167, 242
Highly susceptible to mowing before flowering. Requires bare ground for establishment and persistence. Herbicide application
most effective in early growth stages.
Seedlings establish in bare open ground so establish desirable vegetation cover. Glyphosate 0.5 % provides effective control of
seedling and adult plants or Lontrel® ® 6 mL/10 L (300 ml/ha) + wetting agent, rosette to early flowering.
Does not compete well under high plant density or cover. Requires disturbance to establish and persist. Establish desirable
vegetation.
Does not compete well under high plant density or cover. Requires disturbance to establish and persist. Establish desirable
vegetation.
19, 228, 167, 242
248, 96, 167, 242, 222
333, 325, 167, 242
300, 333, 325, 167, 242
Spot spray 1 % glyphosate + Pulse®or ® 10 mL Lontrel® ® in 10 L of water + 25 mL Pulse ® . 167, 242, 222
Spot spray 1 % glyphosate + Pulse®or ® 10 mL Lontrel® ® in 10 L of water + 25 mL Pulse®. ®
300, 167, 242, 222
Hand remove isolated plants before flowering. Not killed by glyphosate. Spot spray 2 mL Garlon®in ® 10 L of water + 25 mL
wetting agent.
Spot spray 0.2 % glyphosate. 167, 242
Spot spray 0.2 % glyphosate. 167, 242
248, 167, 242, 222
Hand remove isolated plants before flowering. Slash very close to ground (can resprout). 248, 167, 242
Slashing or mowing can cause out of season flowering and seed production. Spot spray in late autumn when most seed has
germinated for the year with 0.5g/10 L chlorsulfuron + wetting agent-this will help prevent further germination. Glyphosate will
control existingplants. Spot spray plants with 1 % Grazon®. ®
Seed produced at early stage. Any control program must aim at killing all plants shortly
after emergence and must continue for a number of years. Spot spray with glyphosate 0.5-0.7 % to kill existing plants but bare
soil quickly reinfested.
Lontrel®at ® 6 mL/10 L (300 mL/ha) + wetting agent applied before flowering or Verdict 520® ® at 1.5 mL/ 10 L (75 mL/ha) +
wetting agent.
229, 248, 96, 257, 167,
242, 222
133, 248, 286, 167, 242,
222
E. cygnorum 12, 228, 222, 101, 167,
242, 222
Colonises degraded sites; spray metsulfuron methyl 0.1 g/15 L (2.5 g/ha) + wetting agent or glyphosate 0.5 %. 101, 167, 242
Colonises degraded sites; spray metsulfuron methyl 0.1 g/15 L (2.5 g/ha) + wetting agent or glyphosate 0.5 %. 101, 167, 242
Colonises degraded sites; spray metsulfuron methyl 0.1 g/15 L (2.5 g/ha) + wetting agent or glyphosate 0.5 %. 254, 62, 101, 167, 242
Rosettes wiped with glyphosate 30 % provides effective control. Dense infestations - 25 mL wetting agent + 10 mL Lontrel®in ®
10 L of water.
Rosettes wiped with glyphosate 30 % provides effective control. Dense infestations - 25 mL wetting agent + 10 mL Lontrel®in ®
10 L of water.
300, 228, 222, 167, 242
300, 54, 228, 167, 242
167, 242
67