phb2013_complete_en.pdf [18.3 MB] - Wöhner

QUADRON®CrossLinkSwitch
Switch disconnector with fuses
Safe, user-independent switching
thanks to spring-controlled
switch mechanism and double
disconnection
Model with door coupling twist
handle and shaft extension for
operation through a closed door
NEW
MOTUS®ContactronControl
Hybrid motor starter with
reversing function
Installation width 22.5mm,
length 160mm
Setting ranges from 0.075 to 0.6A,
0.18 to 2.4A and 1.5 to 9A
UL approval
Panel-mounting components
Switchgear
QUADRON®CrossLinkSwitch
QUADRON®CrossLinkSwitch switch disconnector with
spring-controlled switch mechanism for frequent switching
in utilisation category “A”. With FLAG indicator for
displaying the switch setting, can be locked in the Off
position with up to 3 padlocks. Can be used as a mains
disconnector as per IEC/EN 60204-1 (main switch function).
Can be fi tted with an optional pilot switch for
monitoring the switch setting. Model with rotary drive
for operation through a closed door can be combined
with a door coupling twist handle.
The QUADRON®CrossLinkSwitch version with NH fuses
provides maximum safety. Here, the switch prevents
accidental switch-on when the lid is open, so that fuse
replacement is especially simple and safe. In addition
to the rotary drive version, further models with fuse
monitoring are also available.
Extensive connection accessories further enhance the
product range.
MOTUS®ContactronControl
Hybrid motor starter with additional functions: direct and
reversing starters, overload protection and safety-
oriented switch-off . The compact design with a width of
just 22.5mm saves space in the control cabinet. Integrat ed
functions considerably simplify the wiring. Further more,
service life is extended by the hybrid switching technology.
The switching frequency is up to 10 x higher than in
conventional switchgear such as contactors. The broad
range adjustment also reduces the number of variants:
just 3 versions are required for settings from 0.075A to 9A.
With CrossLink®Adapter for DIN rail, power is fed via the
mounting rail adapter connection. Several mount ing rail
devices can be mounted in series. Power is supplied
through a plug connector with cable connections for up to
four devices. Suitable for use around the world, with
approval for the North American market as well.
6