phb2013_complete_en.pdf [18.3 MB] - Wöhner

CAPUS®EasyUse switch disconnectors sizes 250A – 400A – 630A – 800A
CAPUS®PowerFuse switch disconnectors with fuses for NH-fuses
IEC 60269-2 / VDE 0636-2 size 00 – 1 – 2 – 3
VDE 0660 part 107 / EN 60947-3 / IEC 60947-3
screwing onto mounting plate
3-pole switching, double-breaking main contacts
operator-independent switching; visible air gap
Front shock protection with terminal cover
CAPUS®EasyUse IP40 degree of protection (front side)
CAPUS®PowerFuse IP20 degree of protection (front side)
Degree of protection near terminal depends on installation
voltage-free fuse replacement
Conductor terminals:
Size Screw Clamp-type Terminal Wedge-type terminal
terminal terminal space Cu and Al*
LTS-250 M10 fl . Cu 14 x 1 - 9 70 - 120mm2 s(r), f, f + AE**
LTS-400 M10 fl . Cu 18 x 1 - 10 70 - 150mm2 s(r), f, f + AE**
Md 6 - 8Nm
LTS-630 M10 fl . Cu 21 x 1 - 13 120 - 240mm2 s(r), f, f + AE**
LTS-800 M12 fl . Cu 25 x 1 - 13
LTS-F160 M8 Cu 2.5 - 70mm2 12 x 1 - 10
Md 14Nm s(r), f, fl . Cu
+/- 10% Md 3Nm
LTS-F250 M10 fl . Cu 18 x 1 - 10 70 - 150mm2 s(r), f, f + AE**
LTS-F400 M10 fl . Cu 21 x 1 - 13 120 - 240mm2 s(r), f, f + AE**
LTS-F630 M12 fl . Cu 25 x 1 - 13
* Not maintenance-free when aluminium conductors are used (see page 8/2).
** Reducing the maximum conductor cross-sections may be required
Covers for door and permanent mounting
not lockable, IP 64 degree of protection.
Triple lockable, degree of protection IP54.
Pilot switch for switch position indicator
Rated operating voltage (rated operating current) 250V AC (4A), 400V AC (3A)
8
37