phb2013_complete_en.pdf [18.3 MB] - Wöhner

EQUES®EasyConnector
EQUES®MotorController
Busbar adapters up to 80A
60mm-System
3-pole, 690V ˜
can be fi tted to all busbars in the 60mm-System.
Combination base accommodates busbars 5 and 10mm thick.
EN 60715 plastic mounting rail, for staggered arrangement in 1.25mm pitch.
Copper conductors, ultrasound-welded:
12/16A: AWG 14 1.8mm x 1.8mm
25A: AWG 12 2.3mm x 2.3mm
25A: terminals (Cu 0.75 - 6mm 2 , sol(r), f, f+AE),
32A: spring terminals (1.5 - 6mm 2 , sol(r), f, f+AE)
32A: AWG 10 2.9mm x 2.9mm
45A: AWG 8 3.2mm x 3.6mm
63A: AWG 8 3.2mm x 3.6mm
80A: terminals (Cu 1.5 - 16mm 2 , sol(r), s(r), f, f+AE)
Short-circuit protection through current limitation of the associated switchgear.
Ensure cabling is shock-protected.
EQUES®MotorController, busbar adapter dividable
Up to size 45A also available with a lockable and removable upper section when separated.
The base remains shock pro tected on the bus bar system.
(Changeover) microswitch protects the load release. Rated operating voltage
(rated operating current) 250V AC (5A).
Busbar adapters 1-pole 32A, 63A
60mm-System compact
1-pole, 690V ˜
Can be fi tted on 12 x 5mm busbars.
Fixed mounting rails for snapping on automatic circuit breakers.
Copper conductor ultrasound-welded.
Short circuit protection by means of limiting the current of the assigned automatic circuit breakers.
Ensure cable is shock-protected.
Technical specifications
8
12