Manual Laser Marking Software Magic Mark
Manual Laser Marking Software Magic Mark
Manual Laser Marking Software Magic Mark
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Program description<br />
3.7.5.5 Ellipse parameter<br />
BaseRef The BaseRef group enables you to establish which point of the object<br />
is to be fixed to which coordinates. See BaseRef on page 131.<br />
NOTE!<br />
The BaseRef can be changed by clicking and dragging<br />
the right mouse button in the graphic window.<br />
Radius X, Y Stating the two radii results in the ellipse.<br />
A circle results from equal radii.<br />
Angle If you want an ellipse/circle segment, then you determine the segment<br />
with the beginning or end angle.<br />
3.7.5.6 Text parameter<br />
Fig. 47 Ellipse parameter<br />
Fig. 48 Text parameter<br />
BaseRef The BaseRef group enables you to establish which point of the object<br />
is to be fixed to which coordinates. See BaseRef on page 131.<br />
NOTE!<br />
The BaseRef can be changed by clicking and dragging<br />
the right mouse button in the graphic window.<br />
42 <strong>Laser</strong> marking software: V1.5 Build: 343