Manual Laser Marking Software Magic Mark

Program description
Barcode height For the definition of the barcode heights see Barcode specification
on page 134.
Module parameter By Module Width, the width of the narrowest barcode bar is meant.
With Fill Distance you determine the distance at which the laser
draws the lines necessary for filling.
3.7.5.8 Datamatrix
parameter
CAUTION!
The fill spacing might also be slightly changed by the
program in order to comply with the required module
width.
If this is not desired on critical materials, it can be prevented
by setting the module width to a whole number
multiple of the fill distance.
Inverse is selected if the laser generates light instead of dark lines.
In this case the spaces in the barcode are then lasered.
Fig. 50 Datamatrix parameter
BaseRef The BaseRef group enables you to establish which point of the object
is to be fixed to which coordinates. See BaseRef on page 131.
NOTE!
The BaseRef can be changed by clicking and dragging
the right mouse button in the graphic window.
Data The barcode content is entered in this text box.
For special data, like date or time, see Format specifications on
page 132.
Module parameter Choose the required version of the datamatrix barcode under Type.
Size fixes the size of an individual point of the datamatrix code.
The total size results from the number of points that comprises the
datamatrix code, multiplied by the stated Size.
With Fill Distance you determine the distance at which the laser
draws the lines necessary for filling.
44 Laser marking software: V1.5 Build: 343