Manual Laser Marking Software Magic Mark
Manual Laser Marking Software Magic Mark
Manual Laser Marking Software Magic Mark
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Program description<br />
3.7.5.13 Rotation parameter<br />
3.7.5.14 Mirror parameter<br />
3.7.5.15 Polar parameter<br />
It is possible to change the size of a graphic (X-size, Y-size) around<br />
a fixed point (X-centre Y-centre) with the Size modifier.<br />
It is possible to give an relative factor or an absolute size value.<br />
Fig. 56 Rotation parameter<br />
You can rotate a graphic around a fixed point X-centre Y-centre by<br />
a certain angle.<br />
Fig. 57 Mirror parameter<br />
By specifying a centre point (X-centre, Y-centre) of a virtual coordinate<br />
system, you can mirror the graphic at the axes of this coordinate<br />
system.<br />
Fig. 58 Polar parameter<br />
The graphic is aligned to the circumference of a virtual circle, which<br />
you have specified with (X-centre, Y-centre and radius).<br />
Max Length defines the maximum length of a straight-running line<br />
section.<br />
1 mm is normally a good value.<br />
In special cases it may be necessary to change this value.<br />
48 <strong>Laser</strong> marking software: V1.5 Build: 343