User Guide for Cisco Secure Access Control Server - Stewing Home

Network Access Filters
4-4
Step 4 In the Name box, type the name of the new network-access filter.
User Guide for Cisco Secure Access Control Server 4.2
Chapter 4 Shared Profile Components
Note The name of a NAF can contain up to 31 characters. Spaces are not allowed. Names cannot
contain: left bracket ([), right bracket (]), comma(,), slash (/), dash (–), hyphen (-), quotes (“),
apostrophe (‘), right angle bracket (>), left angle bracket ( (right arrow button) to move it to the Selected Items box.
b. To include a AAA client in the NAF definition, from the Network Device Groups box, select the
applicable NDG and then, from the Network Devices box, select the AAA client you want to
include. Finally, click --> (right arrow button) to move it to the Selected Items box.
Tip If you are using NDGs, the AAA clients appear in the Network Devices box only when you have
selected the NDG to which they belong. Otherwise, if you are not using NDGs, you can select
the AAA client from the Network Devices box with no prior NDG selection.
c. To include an IP address in the NAF definition, type the IP address in the IP Address box. Click -->
(right arrow button) to move it to the Selected Items box.
Note You can use the asterisk (*), which is the wildcard character, to designate a range within an
IP address.
Step 7 Ensure that the order of the items is correct. To change the order of items, in the Selected Items box,
click the name of an item, and then click Up or Down to move it to the position that you want.
Tip You can also remove an item from the Selected Items box by selecting the item and then clicking
Service Control. Then, choose Restart.
Note Restarting the service clears the Logged-in User report and temporarily interrupts all ACS
services. This action affects the Max Sessions counter and resets it to zero (0).
The Network Access Filtering table page appears, and lists the name and description of the new NAF.
OL-14386-02