User Guide for Cisco Secure Access Control Server - Stewing Home

User Management
6-38
Step 1 In the navigation bar, click User Setup.
The User Setup Select page opens.
Step 2 Type the name in the User box, and then click Find.
Tip You can use an asterisk (*) as a wildcard in this box.
User Guide for Cisco Secure Access Control Server 4.2
Chapter 6 User Management
Tip To display a list of usernames that begin with a particular letter or number, click the letter or
number in the alphanumeric list. A list of users, whose names begin with that letter or number,
opens in the display area on the right.
The username, status (enabled or disabled), and group to which the user belongs appear in the display
area on the right.
Step 3 To view or edit the information for the user, click the username in the display area on the right.
The user account information appears.
Disabling a User Account
To manually disable a user account in the ACS internal database:
Note To configure the conditions by which a user account will automatically be disabled, see Setting Options
for User Account Disablement, page 6-13.
Note Do not confuse this procedure with account expiration due to password aging. Password aging is defined
for groups only, not for individual users.
To disable a user account:
Step 1 In the navigation bar, click User Setup.
The User Setup Select page opens.
Step 2 In the User box, type the name of the user whose account is to be disabled.
Step 3 Click Add/Edit.
The User Setup Edit page opens. The username being edited is at the top of the page.
Step 4 Select the Account Disabled check box.
Step 5 Click Submit at the bottom of the page.
The specified user account is disabled.
OL-14386-02