User Guide for Cisco Secure Access Control Server - Stewing Home

Recommendations

Info

Advanced User Authentication Settings 6-18 User Guide for Cisco Secure Access Control Server 4.2 Chapter 6 User Management Ensure that you have already configured one or more shell command-authorization sets. For detailed steps, see Adding a Command Authorization Set, page 4-29. To specify shell command-authorization set parameters for a user: Step 1 Perform Step 1 through Step 3 of Adding a Basic User Account, page 6-3. The User Setup Edit page opens. The username that you add or edit appears at the top of the page. Step 2 Scroll down to the TACACS+ Settings table and to the Shell Command Authorization Set feature area within it. Step 3 To prevent the application of any shell command-authorization set, click (or accept the default of) the None option. Step 4 To assign the shell command-authorization set at the group level, select the As Group option. Step 5 To assign a particular shell command-authorization set to be effective on any configured network device: a. Select the Assign a Shell Command Authorization Set for any network device option. b. Then, from the list directly below that option, select the shell command-authorization set that you want to apply to this user. Step 6 To create associations that assign a particular shell command-authorization set to be effective on a particular NDG, for each association: a. Select the Assign a Shell Command Authorization Set on a per Network Device Group Basis option. b. Select a Device Group and an associated Command Set. c. Click Add Association. Tip You can also select which command set applies to network device groups that are not listed by associating that command set with the NDG listing. The NDG or NDGs and associated shell command-authorization set or sets are paired in the table. Step 7 To define the specific Cisco IOS commands and arguments to permit or deny for this user: Caution This step configures a powerful, advanced feature. Only an administrator who is skilled with Cisco IOS commands should use this feature. Correct syntax is the responsibility of the administrator. For information on how ACS uses pattern matching in command arguments, see About Pattern Matching, page 4-28. a. Select the Per User Command Authorization option. b. Under Unmatched Cisco IOS commands, select Permit or Deny. If you select Permit, the user can issue all commands that are not specifically listed. If you select Deny, the user can issue only those commands that are listed.h c. To list particular commands to permit or deny, check the Command check box and then type the name of the command, define its arguments using standard permit or deny syntax, and select whether unlisted arguments are to be permitted or denied. OL-14386-02
Chapter 6 User Management OL-14386-02 Advanced User Authentication Settings Tip To enter several commands, you must click Submit after entering a command. A new command entry box appears below the box that you just completed. Step 8 To continue to specify other user account options, perform the required steps. See the other procedures in this section, as applicable. Step 9 If you are finished configuring the user account options, click Submit to record the options. Configuring a PIX Command Authorization Set for a User Use this procedure to specify the PIX command-authorization set parameters for a user. The options are: None—No authorization for PIX commands. Group—The group-level PIX command-authorization set applies for this user. Assign a PIX Command Authorization Set for any network device—One PIX command-authorization set is assigned, and it applies to all network devices. Assign a PIX Command Authorization Set on a per Network Device Group Basis—Particular PIX command-authorization sets will be effective on particular NDGs. Before You Begin Ensure that you configure an AAA client to use TACACS+ as the security control protocol. In Interface Configuration > Advanced Options, ensure that the Per-user TACACS+/RADIUS Attributes check box is selected. In Interface Configuration > TACACS+ (Cisco), ensure that the PIX Shell (pixShell) option is selected in the User column. Ensure that you have configured one or more PIX command-authorization sets. For detailed steps, see Adding a Command Authorization Set, page 4-29. To specify PIX command-authorization set parameters for a user: Step 1 Perform Step 1 through Step 3 of Adding a Basic User Account, page 6-3. The User Setup Edit page opens. The username that you add or edit appears at the top of the page. Step 2 Scroll down to the TACACS+ Settings table and to the PIX Command Authorization Set feature area within it. Step 3 To prevent the application of any PIX command-authorization set, select (or accept the default of) the None option. Step 4 To assign the PIX command-authorization set at the group level, select the As Group option. Step 5 To assign a particular PIX command-authorization set to be effective on any configured network device: a. Select the Assign a PIX Command Authorization Set for any network device option. b. From the list directly below that option, select the PIX command-authorization set that you want to apply to this user. User Guide for Cisco Secure Access Control Server 4.2 6-19
Page 1 and 2:
User Guide for Cisco Secure Access
Page 3 and 4:
CHAPTER 1 Overview 1-1 OL-14386-02
Page 5 and 6:
CHAPTER 3 Network Configuration 3-1
Page 7 and 8:
OL-14386-02 Cloning a RADIUS Author
Page 9 and 10:
OL-14386-02 Setting a Separate CHAP
Page 11 and 12:
OL-14386-02 VoIP Accounting Configu
Page 13 and 14:
OL-14386-02 NAC Attribute Managemen
Page 15 and 16:
OL-14386-02 Configuring and Enablin
Page 17 and 18:
OL-14386-02 Enabling Machine Authen
Page 19 and 20:
OL-14386-02 Configuring ACS in a NA
Page 21 and 22:
OL-14386-02 Configuring Authenticat
Page 23 and 24:
OL-14386-02 Microsoft MPPE Dictiona
Page 25 and 26:
OL-14386-02 Using the RDBMS Synchro
Page 27 and 28:
Audience Organization OL-14386-02 P
Page 29 and 30:
Preface OL-14386-02 Tip Identifies
Page 31 and 32:
Preface Table I-1 Product Documenta
Page 33 and 34:
Preface OL-14386-02 User Guide for
Page 35 and 36:
Table I-1 Product Documentation I-X
Page 37 and 38:
Table 13-5 Posture Validation Compo
Page 39 and 40:
Table E-12 Example accountActions T
Page 41 and 42:
OL-14386-02 Overview Introduction t
Page 43 and 44:
Chapter 1 Overview ACS Features, Fu
Page 45 and 46:
Chapter 1 Overview Platforms OL-143
Page 47 and 48:
Chapter 1 Overview Authentication A
Page 49 and 50:
Chapter 1 Overview OL-14386-02 Appl
Page 51 and 52:
Chapter 1 Overview Advanced Passwor
Page 53 and 54:
Chapter 1 Overview Max Sessions Dyn
Page 55 and 56:
Chapter 1 Overview Accounting OL-14
Page 57 and 58:
Chapter 1 Overview OL-14386-02 Mana
Page 59 and 60:
Chapter 1 Overview OL-14386-02 - Di
Page 61 and 62:
Chapter 1 Overview Uniform Resource
Page 63 and 64:
Chapter 1 Overview ACS Windows Serv
Page 65 and 66:
Chapter 1 Overview Technology White
Page 67 and 68:
OL-14386-02 Using the Web Interface
Page 69 and 70:
Chapter 2 Using the Web Interface O
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Chapter 2 Using the Web Interface S
Page 77 and 78:
Chapter 2 Using the Web Interface T
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
OL-14386-02 Network Configuration C
Page 85 and 86:
Chapter 3 Network Configuration OL-
Page 87 and 88:
Chapter 3 Network Configuration Cha
Page 89 and 90:
Chapter 3 Network Configuration Sea
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Chapter 3 Network Configuration Edi
Page 97 and 98:
Chapter 3 Network Configuration Con
Page 99 and 100:
Chapter 3 Network Configuration Add
Page 101 and 102:
Page 103 and 104:
Chapter 3 Network Configuration Add
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
OL-14386-02 Shared Profile Componen
Page 117 and 118:
Chapter 4 Shared Profile Components
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
OL-14386-02 User Group Management C
Page 149 and 150:
Chapter 5 User Group Management Gro
Page 151 and 152:
Chapter 5 User Group Management Set
Page 153 and 154:
Chapter 5 User Group Management OL-
Page 155 and 156: Chapter 5 User Group Management OL-
Page 167 and 168: Chapter 5 User Group Management Set
Page 183 and 184: Chapter 5 User Group Management Con
Page 189 and 190: OL-14386-02 User Management CHAPTER
Page 191 and 192: Chapter 6 User Management OL-14386-
Page 199 and 200: Chapter 6 User Management Setting M
Page 205: Chapter 6 User Management OL-14386-
Page 215 and 216: Chapter 6 User Management Setting C
Page 217 and 218: Chapter 6 User Management Setting A
Page 227 and 228: Chapter 6 User Management Deleting
Page 229 and 230: Chapter 6 User Management Removing
Page 231 and 232: Service Control OL-14386-02 System
Page 233 and 234: Chapter 7 System Configuration: Bas
Page 257 and 258:
Chapter 7 System Configuration: Bas
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
OL-14386-02 CHAPTER System Configur
Page 267 and 268:
Chapter 8 System Configuration: Adv
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
. Chapter 8 System Configuration: A
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
OL-14386-02 CHAPTER 9 System Config
Page 327 and 328:
Chapter 9 System Configuration: Aut
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
OL-14386-02 Logs and Reports CHAPTE
Page 375 and 376:
Chapter 10 Logs and Reports OL-1438
Page 377 and 378:
Chapter 10 Logs and Reports ACS Aud
Page 379 and 380:
Chapter 10 Logs and Reports Syslog
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Chapter 10 Logs and Reports Configu
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Chapter 10 Logs and Reports Downloa
Page 407 and 408:
Page 409 and 410:
Chapter 10 Logs and Reports Update
Page 411 and 412:
Chapter 10 Logs and Reports Remote
Page 413 and 414:
Chapter 10 Logs and Reports Table 1
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
OL-14386-02 CHAPTER 11 Administrato
Page 423 and 424:
Chapter 11 Administrators and Admin
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
OL-14386-02 User Databases CHAPTER
Page 445 and 446:
Chapter 12 User Databases About Ext
Page 447 and 448:
Chapter 12 User Databases Windows U
Page 449 and 450:
Chapter 12 User Databases OL-14386-
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Chapter 12 User Databases Setting U
Page 457 and 458:
Chapter 12 User Databases Enabling
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Chapter 12 User Databases Generic L
Page 467 and 468:
Chapter 12 User Databases LDAP Fail
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Chapter 12 User Databases Figure 12
Page 481 and 482:
Page 483 and 484:
Chapter 12 User Databases PAP Proce
Page 485 and 486:
Chapter 12 User Databases EAP-TLS P
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Chapter 12 User Databases Token Ser
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
OL-14386-02 Posture Validation CHAP
Page 503 and 504:
Chapter 13 Posture Validation Postu
Page 505 and 506:
Chapter 13 Posture Validation Polic
Page 507 and 508:
Chapter 13 Posture Validation Inter
Page 509 and 510:
Chapter 13 Posture Validation Exter
Page 511 and 512:
Chapter 13 Posture Validation Polic
Page 513 and 514:
Chapter 13 Posture Validation Confi
Page 515 and 516:
Chapter 13 Posture Validation OL-14
Page 517 and 518:
Chapter 13 Posture Validation Creat
Page 519 and 520:
Chapter 13 Posture Validation Editi
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Chapter 13 Posture Validation Delet
Page 527 and 528:
Page 529 and 530:
Chapter 13 Posture Validation Table
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Overview of NAPs OL-14386-02 Networ
Page 543 and 544:
Chapter 14 Network Access Profiles
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
OL-14386-02 Unknown User Policy CHA
Page 593 and 594:
Chapter 15 Unknown User Policy OL-1
Page 595 and 596:
Chapter 15 Unknown User Policy Wind
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
OL-14386-02 CHAPTER User Group Mapp
Page 603 and 604:
Chapter 16 User Group Mapping and S
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
OL-14386-02 TACACS+ Attribute-Value
Page 613 and 614:
Appendix A TACACS+ Attribute-Value
Page 615 and 616:
OL-14386-02 RADIUS Attributes APPEN
Page 617 and 618:
Appendix B RADIUS Attributes OL-143
Page 619 and 620:
Appendix B RADIUS Attributes Table
Page 621 and 622:
Appendix B RADIUS Attributes OL-143
Page 623 and 624:
Page 625 and 626:
Page 627 and 628:
Page 629 and 630:
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Page 637 and 638:
Page 639 and 640:
Page 641 and 642:
Page 643 and 644:
Page 645 and 646:
OL-14386-02 CSUtil Database Utility
Page 647 and 648:
Appendix C CSUtil Database Utility
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
VPDN Process OL-14386-02 VPDN Proce
Page 689 and 690:
Appendix D VPDN Processing OL-14386
Page 691 and 692:
OL-14386-02 APPENDIXE RDBMS Synchro
Page 693 and 694:
Appendix E RDBMS Synchronization Im
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
OL-14386-02 Internal Architecture A
Page 725 and 726:
Appendix F Internal Architecture So
Page 727 and 728:
Appendix F Internal Architecture OL
Page 729 and 730:
Appendix F Internal Architecture CS
Page 731 and 732:
Appendix F Internal Architecture CS
Page 733 and 734:
Appendix F Internal Architecture Re
Page 735 and 736:
Numerics 3COMUSR settings 2-14 A AA
Page 737 and 738:
deleting 8-48 dumping 8-50 enabling
Page 739 and 740:
ACS internal database collection in
Page 741 and 742:
in Group Setup 5-2 mapping for Wind
Page 743 and 744:
F configuring 12-3 deleting configu
Page 745 and 746:
LDAP Admin Logon Connection Managem
Page 747 and 748:
NAC Agentless Host 14-18 NAC L2 IP
Page 749 and 750:
emote change 7-4 user-changeable 1-
Page 751 and 752:
3COM/USR in Group Setup 5-37 in Use
Page 753 and 754:
eports 10-1 downloading CSV 10-33 e
Page 755 and 756:
accounting logs 10-2 administration
Page 757 and 758:
See VoIP (Voice-over-IP) VoIP accou
show all

User Guide for Cisco Secure Access Control Server - Stewing Home

Create successful ePaper yourself

Delete template?

Save as template?