User Guide for Cisco Secure Access Control Server - Stewing Home

RADIUS Authorization Components
Adding RADIUS Authorization Components
4-10
User Guide for Cisco Secure Access Control Server 4.2
Chapter 4 Shared Profile Components
Before You Begin
You should have already configured any RADIUS options that you plan to use on ACS. For details on
what to configure, see Vendors, page 4-7.
To add a RAC:
Step 1 In the navigation bar, click Shared Profile Components.
The Shared Profile Components page appears.
Step 2 Click RADIUS Authorization Components.
The RADIUS Authorization Components Table Page appears.
Step 3 Click Add to create a new RADIUS Authorization Component.
The Edit RADIUS Authorization Component Page appears.
Step 4 To add a new attribute, select the correct vendor attribute by using the drop-down list and click the Add
button.
The RAC Attribute Add/Edit Page appears.
Note The vendors that are available for selection are those that have devices defined in the Network
Configuration and that have attributes configured for display (at the group or user level) under
Interface Configuration.
Step 5 Select the attribute value and click Submit.
Cloning a RADIUS Authorization Component
To make a copy of an existing RAC by using the clone feature:
Step 1 In the navigation bar, click Shared Profile Components.
The Shared Profile Components page appears.
Step 2 Click RADIUS Authorization Components.
The RADIUS Authorization Components Table Page appears.
Step 3 Select the RAC name of the component that you want to clone.
The Edit RADIUS Authorization Component Page appears.
Step 4 To clone an existing RAC with all of its attributes, click Clone.
A clone named Copy of RACname is created in the Edit RADIUS Authorization Component page.
Step 5 Click Submit to save the new RAC.
OL-14386-02