User Guide for Cisco Secure Access Control Server - Stewing Home

OL-14386-02
User Management
CHAPTER
6
This chapter contains information about setting up and managing user accounts in the Cisco Secure
Access Control Server Release 4.2, hereafter referred to as ACS.
This chapter contains:
About User Setup Features and Functions, page 6-1
About User Databases, page 6-2
Basic User Setup Options, page 6-2
Advanced User Authentication Settings, page 6-15
User Management, page 6-37
Caution Settings at the user level override settings that you configured at the group level.
Before you configure User Setup, you should understand how this section functions. ACS dynamically
builds the User Setup section interface depending on the configuration of your Authentication,
Authorization, and Accounting (AAA) client and the security protocols that you use. That is, what you
see under User Setup is affected by settings in the Network Configuration and Interface Configuration
sections.
About User Setup Features and Functions
The User Setup section of the ACS web interface is the centralized location for all operations regarding
user account configuration and administration.
From within the User Setup section, you can:
View a list of all users in the ACS internal database.
Find a user.
Add a user.
Assign the user to a group, including Voice-over-IP (VoIP) groups.
Edit user account information.
Establish or change user authentication type.
Configure callback information for the user.
Set network-access restrictions (NARs) for the user.
User Guide for Cisco Secure Access Control Server 4.2
6-1