User Guide for Cisco Secure Access Control Server - Stewing Home

Chapter 5 User Group Management
OL-14386-02
Step 1 In the navigation bar, click Group Setup.
The Group Setup Select page opens.
Step 2 From the Group list, choose the group and click Edit Settings.
Group Setting Management
Step 3 In the Usage Quotas section, check the On submit reset all usage counters for all users of this group
check box.
Step 4 Click Submit at the bottom of the browser page.
The usage quota counters for all users in the group are reset. The Group Setup Select page appears.
Renaming a User Group
To rename a user group:
Step 1 In the navigation bar, click Group Setup.
The Group Setup Select page opens.
Step 2 From the Group list, choose the group.
Step 3 Click Rename Group.
The Renaming Group: Group Name page appears.
Step 4 Type the new name in the Group field. Group names cannot contain angle brackets (< >).
Step 5 Click Submit.
Note The group remains in the same position in the list. The number value of the group is still
associated with this group name. Some utilities, such as the database import utility, use the
numeric value that is associated with the group.
The Select page opens with the new group name selected.
Saving Changes to User Group Settings
After you have completed configuration for a group, you must save your work.
To save the configuration for the current group:
Step 1 To save your changes and apply them immediately, click Submit + Apply. This action restarts ACS
services and applies the changes.
You can click only the Submit button if you do not want to affect your network with a restart.
Step 2 To save your changes and apply them later, click Submit. When you are ready to implement the changes,
choose System Configuration > Service Control. Then, choose Restart.
The group attributes are applied and services are restarted. The Edit page opens.
User Guide for Cisco Secure Access Control Server 4.2
5-41