User Guide for Cisco Secure Access Control Server - Stewing Home

Advanced System Configuration Pages Reference
9-40
User Guide for Cisco Secure Access Control Server 4.2
Chapter 9 System Configuration: Authentication and Certificates
Step 4 Click Submit.
ACS begins generating PAC files for the user or users specified. If you use the Users from list option,
ACS first retrieves the list from the FTP server specified.
On the EAP-FAST PAC Files Generation page, ACS displays a Current PAC CAB file generation status
message.
Step 5 If the Current PAC CAB file generation status display is: CAB file generation is in progress
click Refresh occasionally until the Current PAC CAB file generation status display is: CAB file is
ready. Press Download to retrieve the file.
Depending on how many users you specified, ACS requires anywhere from a few seconds to a few
minutes to generate PAC files.
Step 6 When the Current PAC CAB file generation status display is: CAB file is ready, Click Download to
retrieve the file click download.
Note The file download options that your web browser provides may differ; however, the fundamental process
should be similar to these steps.
The File Download dialog box appears.
Step 7 On the File Download dialog box, click Save.
The Save As dialog box appears.
Step 8 Use the Save As dialog box to specify where and with what filename you want to save the PACFiles.cab
file. Then click Save.
ACS sends the PACFiles.cab file to your web browser, which saves the file where you specified. When
the download is complete, a Download Complete dialog box appears.
Step 9 Note the location of the PACFiles.cab file, and then click Close.
Step 10 You can use the file compression utility of your choice to extract the PAC files from the PACFiles.cab
file.
Advanced System Configuration Pages Reference
This section describes the following topics:
Global Authentication Setup Page, page 9-41
EAP-FAST Configuration Page, page 9-44
OL-14386-02