Manual DoorCom IP DCIP 740-0 - Siedle
Manual DoorCom IP DCIP 740-0 - Siedle
Manual DoorCom IP DCIP 740-0 - Siedle
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 Terminals<br />
SIVS 610-0, SIM <strong>740</strong>-0<br />
Block diagram SIVS 610-0<br />
G Reference for the inputs<br />
E1–E4<br />
E4 not assigned<br />
E3 not assigned<br />
E2 not assigned<br />
E1 not assigned<br />
cv- Power supply for<br />
bv+ Vario bus, 15 V DC, max.<br />
300 mA<br />
Da/Db Vario bus<br />
+ Supply voltage<br />
- 24 V DC<br />
Tö not used, DR via<br />
Tö TLC 640-02<br />
Li not used<br />
USP Universal Serial Port,<br />
SN1 RF signal, path<br />
SN2 SIM <strong>740</strong>-...–SIVS 610-...<br />
n1 RF signal for<br />
n2 connected<br />
DCA <strong>740</strong>-01<br />
Block diagram SIM <strong>740</strong>-0<br />
S1 Switching output 1<br />
S2 Switching output 2<br />
S3 Switching output 3<br />
S4 Switching output 4<br />
cv- Power supply for<br />
bv+ 15 V DC<br />
1–8 <strong>Siedle</strong> Multi<br />
E1 Input 1<br />
E2 Input 2<br />
E3 Input 3<br />
Da/Db Vario bus<br />
SN1 RF signal, path<br />
SN2 SIM <strong>740</strong>-...–SIVS 610-...<br />
16