Condair Esco

Electric rotary control valve actuator
Condair CA 75 without emergency function
Version:
Actuator housing made of plastic, without emergency function, with
electrically limited 90° rotation angle, suitable only for direct attachment
to connection units Esco 5 and Esco 10. Ideal for using in conjunction
with low-capacity humidifiers to supplement humidification.
Since the rotary control valve actuator Condair CA 75 does not incorporate
an emergency function, the responsibility for using it lies with
the planning engineer. He must decide on the necessary safety measures
in case of power loss, e.g. shut-off valve with spring-loaded return actuator,
connected in series, or an emergency stand-by voltage supply.
Specifications:
CA 75
Supply voltage 24 VDC or 24 VAC / 50/60 Hz / Power consumption 2 VA
Control signal Y 0-10 VDC
Input impedance 100 kΩ (0,1 mA)
Operating range 2-10 VDC
Measuring voltage U 2-10 VDC (max. 0,5 mA)
Torque / run time 5 Nm / motor: 150 s
Auxiliary switch potential free none
Protection class III (extra-low safety voltage), CE / IP 54
Position indicator mechanical
max. permissible steam temperature 152 °C
Ambient temperature -30 ... +50 °C
Ambient humidity Class D in accordance with DIN 40040
Weight 480 g
Adaptor for mounting rotary control valve actuators of different
makes
The steam humidification system Condair Esco can be adapted to any
commercially available rotary actuator makes, by using appropriate adaptor
parts and accessories.
Before installing different rotary control valve actuators, the supplier must
be contacted.
Adaptors are currently available for the following third-party electric rotary
actuators:
– Sauter ASF 123 SF 122
– Siemens GCA 161.1E
– Joventa DM 1.1 F-R
21