Annex I - VERTIC

▼M2
2B 5. (continued)
f. If any axis of a machine model not controlled by 2B001.a.
to 2B001.c. or 2B201 has a stated accuracy  of 6 microns
for grinding machines and 8 microns for milling and
turning machines or better, the manufacturer should be
required to reaffirm the accuracy level once every 18
months.
2B001 Machine tools and any combination thereof, for removing (or
cutting) metals, ceramics or ‘composites’, which, according to
the manufacturer’s technical specification, can be equipped with
electronic devices for ‘numerical control’, and specially designed
components as follows:
NB: SEE ALSO 2B201.
Note 1: 2B001 does not control special purpose machine tools
limited to the manufacture of gears. For such machines
see 2B003.
Note 2: 2B001 does not control special purpose machine tools
limited to the manufacture of any of the following:
a. Crankshafts or camshafts;
b. Tools or cutters;
c. Extruder worms; or
d. Engraved or facetted jewellery parts.
Note 3: A machine tool having at least two of the three turning,
milling or grinding capabilities (e.g. a turning machine
with milling capability), must be evaluated against each
applicable entry 2B001.a., b. or c.
NB: For optical finishing machines, see 2B002.
a. Machine tools for turning having all of the following:
1. Positioning accuracy with ‘all compensations available’
equal to or less (better) than 6 μm according to ISO 230/2
(1988) ( 1 ) or national equivalents along any linear axis; and
2. Two or more axes which can be coordinated simultaneously
for ‘contouring control’;
Note: 2B001.a. does not control turning machines specially
designed for producing contact lenses, having both of
the following:
a. Machine controller limited to using ophthalmic
based software for part programming data input;
and
b. No vacuum chucking.
( 1 ) Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997)
should consult the competent authorities of the Member State in which they are established.
2009R0428 — EN — 15.06.2012 — 002.001 — 113