Annex I - VERTIC

▼M2
6A005 b. 7. a. (continued)
2. Single transverse mode output and ‘average output
power’ exceeding 20 W; or
3. Multiple transverse mode output and ‘average output
power’ exceeding 50 W; or
b. ‘Pulse duration’ exceeding 1 μs and any of the following:
1. Output energy exceeding 2 J per pulse and ‘peak
power’ exceeding 50 W;
2. Single transverse mode output and ‘average output
power’ exceeding 50 W; or
3. Multiple transverse mode output and ‘average output
power’ exceeding 80 W; or
8. Output wavelength exceeding 1 555 nm and any of the
following:
a. Output energy exceeding 100 mJ per pulse and ‘peak
power’ exceeding 1 W; or
b. ‘Average output power’ exceeding 1 W;
c. ‘Tunable’ ‘lasers’ having any of the following:
Note: 6A005.c. includes titanium-sapphire (Ti: Al 2 O 3 ),
thulium-YAG (Tm: YAG), thulium-YSGG (Tm: YSGG),
alexandrite (Cr: BeAl 2 O 4 ), colour centre ‘lasers’, dye
‘lasers’, and liquid ‘lasers’.
1. Output wavelength less than 600 nm and any of the
following:
a. Output energy exceeding 50 mJ per pulse and ‘peak
power’ exceeding 1 W; or
b. Average or CW output power exceeding 1 W;
Note: 6A005.c.1. does not control dye lasers or other
liquid lasers, having a multimode output and a
wavelength of 150 nm or more but not
exceeding 600 nm and all of the following:
1. Output energy less than 1,5 J per pulse or a
‘peak power’ less than 20 W; and
2. Average or CW output power less than 20 W.
2. Output wavelength of 600 nm or more but not exceeding
1 400 nm, and any of the following:
a. Output energy exceeding 1 J per pulse and ‘peak power’
exceeding 20 W; or
b. Average or CW output power exceeding 20 W; or
3. Output wavelength exceeding 1 400 nm and any of the
following:
a. Output energy exceeding 50 mJ per pulse and ‘peak
power’ exceeding 1 W; or
b. Average or CW output power exceeding 1 W;
2009R0428 — EN — 15.06.2012 — 002.001 — 232