Annex I - VERTIC

▼M2
6A005 b. 6. (continued)
b. ‘Pulse duration’ equal to or exceeding 1 ns but not
exceeding 1 μs, and any of the following:
1. Single transverse mode output and any of the
following:
a. ‘Peak power’ exceeding 100 MW;
b. ‘Average output power’ exceeding 20 W limited
by design to a maximum pulse repetition frequency
less than or equal to 1 kHz;
c. ‘Wall-plug efficiency’ exceeding 12 %, ‘average
output power’ exceeding 100 W and capable of
operating at a pulse repetition frequency greater
than 1 kHz;
d. ‘Average output power’ exceeding 150 W and
capable of operating at a pulse repetition
frequency greater than 1 kHz; or
e. Output energy exceeding 2 J per pulse; or
2. Multiple transverse mode output and any of the
following:
a. ‘Peak power’ exceeding 400 MW;
b. ‘Wall-plug efficiency’ exceeding 18 % and
‘average output power’ exceeding 500 W;
c. ‘Average output power’ exceeding 2 kW; or
d. Output energy exceeding 4 J per pulse; or
c. ‘Pulse duration’ exceeding 1 μs and any of the following:
1. Single transverse mode output and any of the
following:
a. ‘Peak power’ exceeding 500 kW;
b. ‘Wall-plug efficiency’ exceeding 12 % and
‘average output power’ exceeding 100 W; or
c. ‘Average output power’ exceeding 150 W; or
2. Multiple transverse mode output and any of the
following:
a. ‘Peak power’ exceeding 1 MW;
b. ‘Wall-plug efficiency’ exceeding 18 % and
‘average output power’ exceeding 500 W; or
c. ‘Average output power’ exceeding 2 kW;
7. Output wavelength exceeding 1 150 nm but not exceeding
1 555 nm, and any of the following:
a. ‘Pulse duration’ not exceeding 1 μs and any of the
following:
1. Output energy exceeding 0,5 J per pulse and ‘peak
power’ exceeding 50 W;
2009R0428 — EN — 15.06.2012 — 002.001 — 231