Mechanical Components.pdf - Ken Gilbert

3. Steering Gearbox (Power Steering System)
A: REMOVAL
NOTE:
For disassembly and assembly of gearbox unit, refer to section Control Valve (Power Steering Gearbox.)
and
(1) Universal joint
(2) Dust cover
(3) Valve housing
(4) Gasket
(5) Oil seal
(6) Special bearing
(7) Seal ring
(8) Pinion and valve ASSY
(9) Oil seal
(10) Back-up washer
(11) Ball bearing
(12) Snap ring
(13) Lock nut
(14) Adjusting screw
(15) Spring
(16) Sleeve
(17) Adapter
(18) Clamp
SERVICE PROCEDURE
(19) Cotter pin
(20) Castle nut
(21) Dust cover
(22) Clip
(23) Tie-rod end
(24) Clip
(25) Boot
(26) Band
(27) Tie-rod
(28) Lock washer
(29) Pipe B
(30) Pipe A
(31) Steering body
(32) O-ring
(33) Clamp
(34) Oil seal
(35) Piston ring
(36) Rack
13
[W3A0] 4-3
3. Steering Gearbox (Power Steering System)
(37) Rack bushing
(38) Rack stopper
(39) Circlip
(40) Pipe E
(41) Pipe F
B4M1310C
Tightening torque: N·m (kg-m, ft-lb)
T1: 6±1 (0.6±0.1, 4.3±0.7)
T2: 13±3 (1.3±0.3, 9.4±2.2)
T3: 15±5 (1.5±0.5, 10.8±3.6)
T4: 24±3 (2.4±0.3, 17.4±2.2)
T5: 25±5 (2.5±0.5, 18.1±3.6)
T6: 27.0±2.5 (2.75±0.25, 19.9±1.8)
T7: 59±12 (6.0±1.2, 43±9)
T8: 78±10 (8.0±1.0, 58±7)
T9: 83±5 (8.5±0.5, 61.5±3.6)