Pitney Bowes DM1000 Operating Guide - ASAP Postage Meter Ink, BC

About Printing
Tapes
DM1000 Operating Guide
The DM1000 is designed to use gummed tape or a special pressure sensitive
adhesive tape made exclusively for it. You cannot print postage tapes
in the Seal Only, WOW, or Weigh First Piece modes.
To pr nt one tape, you simply press the Tape key instead of placing mail
on the deck.
To pr nt more than one tape, use the numeric keys to type in the number
of tapes you want, then press the Tape key. The tapes exit into the stacker
on the right side of the mailing system. You can request up to 50 tapes at
a time.
To mo sten gummed tape, move the “wet/dry” tape lever up.
• Wet tapes exit one at a time. The machine pauses for you to remove
each wet tape before it prints and ejects another one.
• If you do not remove wet tape within the required time, the machine
stops. Remove the tape and press the Start button to continue.
• If you use wet tapes make sure you have enough E-Z Seal ® in the
bottle.
For dry tapes or pressure-sens t ve tapes, move the “wet/dry” tape lever
down.
WARNING! Use only fresh rolls of Pitney Bowes tape to avoid
distortion or stalls in the mechanism and possible loss of postage.
Do not lift any of the covers on the mailing system while the system
is printing or the system will stop printing.
SV61968 Rev. A 4-9