Smart Infrared Inspection System Field Operational Test - Center for ...
Smart Infrared Inspection System Field Operational Test - Center for ...
Smart Infrared Inspection System Field Operational Test - Center for ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FILE<br />
TOOLS<br />
The File drop down menu located in the top toolbar allows the operator to open a<br />
single vehicle file or load an entire session back onto the system. This can allow the<br />
operator to return to a session to view the vehicles and alerts if needed. The sessions<br />
are labeled by the date and time the session was initiated. Single vehicle files are<br />
identified by the vehicle number and can be found in the Session files.<br />
Tools, also located in the top toolbar, offers the operator two important functions<br />
within the SIRIS system. From this drop down menu, Options are made available <strong>for</strong><br />
the display and alarm signals. These options are detailed below. From Tools, an<br />
operator can also select “Clear Collected Data”.<br />
Clear Collected Data will clear the vehicle in<strong>for</strong>mation in the Collected Data Box<br />
(detailed later in this section). This will not delete the data from the computer. While<br />
the data will not be shown in the Collected Data Box, the data is still saved on the<br />
computer. An operator may elect to clear the collected data at the beginning of each<br />
shift to make finding a recent vehicle’s in<strong>for</strong>mation easier. SIRIS will hold up to 150<br />
50