SCOPE OF WORK (ELECTRICAL) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.03/CIDCO/EE(Elect)/2011-12 Sr. Page No.
6.0 The Technical specification of all the equipment and the quantities
required of various accessories & auxiliaries. The contractor shall also
ascertain the quantities of items such as HT/LT cables, earthing material,
supporting steel pipes etc. and procure the material as per requirement.
Excess material brought to site & not installed shall not be accepted by
CIDCO nor it will be paid for.
7.0 Inspection:
7.1 All equipment shall be offered for inspection.
7.2 The inspection shall be carried out by CIDCO representative at any stage
of manufacturing. The contractor shall give free access to the inspector at
a reasonable notice.
7.3 The equipment shall be offered for final inspection at least fifteen days in
advance to enable CIDCO to witness the acceptance tests.
7.4 No equipment shall be dispatched to site from the manufacturers work
unless dispatch clearance certificate is issued by the inspecting authority
of CIDCO.
7.5 The contractor shall arrange for the inspection of the equipment by
CIDCO representative & co-ordinate with them for timely dispatches at no
extra cost to CIDCO, including traveling & boarding expenses.
8.0 Documentation :
8.1 The contractor on receipt of LOI shall submit five sets of relevant
descriptive & illustrative literature and general arrangement, schematic
drawings, foundation plans, and any other drawings and the general
technical particulars of all the equipment to be supplied.