Hand tools catalogue - Unior

3
426/3A
Crimp - grip pliers
for insulated terminals (0,5-6mm²), for cutting
cables and wires
toggle joint ensures high compression pressure
with little effort
tool steel jaws, oil hardened, phosphated
handles nickel plated
material: sheet metal
601138 0.5 - 6
L
220 512
426/3B
Crimp - grip pliers
for non insulated terminals (0,5-10mm²), for cutting
cables and wires
toggle joint ensures high compression pressure with
little effort
tool steel jaws, oil hardened, phosphated
handles nickel plated
material: sheet metal
120
Crimping pliers and ring terminals
601139 0.5 - 10
L
220 484
427/4AG
Crimp grip pliers
for cord end sleeves 0,08 - 10mm²/AWG28 - 7
strong metal crimping profile with electrical plating
square crimping performs a better contact than
traditional crimping profile
reinforced connecting spring for longer usage life
621550 433
427/4BG
Modular crimping pliers
professional tool for cutting and stripping unshielded
ribbon telephone cables
for crimping 4-, 6- and 8-pole Western plugs type RJ
10 (7.65 mm width), type RJ 11/12 (9.65 mm width)
and type RJ 45 (11.68 mm width)
exact crimping process due to parallel crimping
with additional stripping device for round cables
with length cutter and dismantling knife for ribbon
cables 6 and 12 mm width
621551 567
427/4CG
Crimp grip pliers
special designed clamping jaws hold the wire securely
during the stripping process
swivel knob micro-adjusts for thinner wire to 30AWG
(0.05mm²) or thicker wire to 8AWG (8mm²)
crimp non-insulated terminals 10-22AWG (1.5 to
6.0mm²)
crimp insulated terminals 10-22AWG (1.5 to 6.0mm²)
crimp auto ignition terminals 7 to 8mm
621552 378
427/4DG
Modular crimping pliers
tool for cutting and stripping unshielded ribbon
telephone cables
for crimping 6- and 8-pole Western plugs type RJ
11/12 (9.65 mm width) and type RJ 45 (11.68 mm
width)
exact crimping process due to parallel crimping
with additional stripping device for round cables
with length cutter and dismantling knife for ribbon
cables 6 and 12 mm width
621553 401
427/2FG
Crimp grip pliers
hexagon crimping
lever transmission permits light force transfer
very easy to handle
the respective cross-section is set by rotating profile
disks
Dented 6-position rotating dies 6, 10, 16, 25, 35,
50mm²
jaws hardened to 38-40HRC
621555 6 - 50 1350