Hand tools catalogue - Unior

15
1614/4BI
Universal crown race puller
material: special tool steel, hardened and tempered
surface finish: blacken to standard DIN 50938
The puller is a tool for quickly and precisely removing the headset crown
race from 1", 1.1/8", 1.1/2" suspension or rigid front fork. To use, place
the puller bush onto the front fork race and fix it by turning the nut. Turn
the spindle attached to the steering column to pull the crown race from
the fork. The product enables efficient race removal without the use of a
hammer. It is intended for both professionals and home users.
D D D L B
620195 1" 1.1/8" 1.1/2" 351 320 3510
1683/4A
Crown race setting system
material: special tool steel
surface finish: blacken to standard DIN 50938
Dimension: 1’’, 1.1/4’’; 1.1/8’’ as additional parts and 1.1/2" is
dimension of the tube.
The crown race setting system is intended for crown race installation
on the steerer tube to fit 1’’, 1.1/4’’, 1.1/8’’, 1.1/2" diameters. The inserts
are interchangeable. This tool enables quick and efficient work.
A A A A L D
620255 1" 1.1/8" 1.1/4" 1.1/2" 319 46 2500
338
Tools for frame and fork
1616/4
Ball race remover
material: special tool steel
surface finish: blacken to standard DIN 50938
This tool is used for removal of headsets of older bike models. To remove
the ball bearing cups, tap on the tool with hammer.
A B H D1 D2 D3 D4
615527 25 55 100 37 41 44 47 422
1681/4
Head set cup remover
material: special tool steel
surface finish: blacken to standard DIN 50938
The head set cup remover makes removal of cups
1", 1.1/8" and 1.1/4" from the frame easy
L D
616291 1" 1.1/8" 1.1/4" 300 40 327