Hand tools catalogue - Unior

262
Dial torque wrench 1/2"
double ended ratcheting spindles
with overload protection
visual signal by pointer, when set torque is
reached
supplied in durable storage case
made according to standard ISO 6789
dual scale lbf.ft and Nm
Important!
Do not use torque wrench for untightening!
Torque tightens only in the direction showed
on the key sticker! Sticker shows the proper
direction of tightening!
The default calibration interval of the torque
wrench is 12 months or 5.000 measurements
from the date of end user purchase.
ALWAYS set the measuring mechanism to
starting point, at the end of work.
When the requested torque are reached,
please do not tight any more.
Torque wrench can be damaged, if manual
instructions are not considered.
a L
607140 16 - 80 50 - 600 86 435 1/2" 1965
Torque wrenches
Digital vernier, torque multiplier
Measuring tape
Spirit level
Squares
Masons profiles
Scriber, flat rule, plumb, pencil
FEATURES OF
260, 262
284 - 288
288 - 289
289 - 290
290 - 291
292
293
293
12