Hand tools catalogue - Unior

15
1695
Frame taps
material: special tool steel
Its function is to scrape out the rust or restore damaged threads. Available in three
different dimensions.
The finish prevents from external damages.
M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle,
fender, rack bosses (616078) M3 - frame tap for derailleur hanger (616077)
M L
616077 3 60,5 8
616078 5 60,5 11
616079 10 60,5 22
1695.1
Pedal taps
material: special tool steel
Precise design and hardened to stay sharp. 1695.1 is used to restore existing pedal
threads and is available in set (left and right).
M L
616080 14 x 1.25 60,5 79
1695.2
Pedal taps
material: special tool steel
Precise design and hardened to stay sharp. 1695.2 is used for cutting
new threads before inserting pedal thread inserts 1695.3 or 1695.4 and
is available in set (left and right).
344
Tools for drive
M L
616081 16 x 1 90,5 140
1695.3
Pedal thread inserts, 10 pieces set, right
material: special tool steel
Inner dimension: M14 x 1,25
Outer dimension: M16 x 1
Pedal thread inserts are used to replace damaged threads in cranks. They are
used together with appropriate pedal taps and are available in 10 pcs sets.
M1 M2 L
616082 M 16 x 1 M 14 x 1,25 13,2 45
1695.4
Pedal thread inserts, 10 pieces set, left
material: special tool steel
Inner dimension: M14 x 1,25
Outer dimension: M16 x 1
Pedal thread inserts are used to replace damaged threads in cranks. They are
used together with appropriate pedal taps and are available in 10 pcs sets.
M1 M2 L
616083 M 16L x 1 M 14L x 1,25 13,2 42
1695.1AL
Pedal taps
material: special tool steel
Precise design and hardened to stay sharp. 1965.1AL is used for cutting
new left threads before inserting left pedal thread inserts 1695.3L.
Pedal tap 1695.1AL removes the old thread before making a new one,
so no other tap is needed.
M L
616554 5/8" x 24 TPI 85,5 81