Hand tools catalogue - Unior

More documents

Recommendations

Info

4 132 Insulated tools A special procedure for the manufacture of insulated tools 1. Cold forging of the socket: this uses a two-phase technological process that includes annealing, phosphating, and contracting. 2. Cnc working of the socket: a special CNC turning machine is used to work the socket into the required size, which is in accordance with the ISO standard. 3. Sanding: cleaning the surface before chroming is important for the sake of quality and durable surface protection. 4. Chroming: the sockets are plated with a thin, hard coating of chromium oxide that protects against corrosion and wear and other mechanical damage. At the same time it gives the entire Unior socket a glossy appearance. PLASTIC COATING PROCESS 5. Double plastic coating: The process of coating of tools in multiple layers of plastic appropriate for work under high voltage conditions is a series of operations with precisely defined parameters of implementation that must not deviate from the requirements. This is the only way to obtain a quality and, most importantly, safe product. Before plastic coating, the piece - the metal part of the tool - has to be prepared for the process. It is degreased in a container of acetone and then dried. In order for the material and the metal part of the tool to adhere together effectively in the required places, the metal part of the tool is submerged in a special liquid that activates its adhesive property. This is followed by mounting the piece on special holders. The process of heating starts in a special chamber furnace and it is then immediately submerged in an orange material. It has to be removed from this material, which is heated to the right temperature, with the optimum speed so that the material drips off. Before the second plastic coating, the pieces are gelatinized in a furnace at the prescribed temperature. This is followed by a second plastic coating with a red material, the process of gelatinizing is repeated and the final plastic coating, once again of the red material, gives the piece the final thickness of a two- or three-layered coating. For the appropriate gloss and a professional appearance, the pieces are stabilized in a furnace at the prescribed temperature. ORANGE AS A WARNING SIGN: The double plastic protection of the VDE tools ensures double safety, because it enables the recognition of worn out tools in due time. When the tool gets worn out, an orange colour appears (the second protection layer), which is a sign that the tool should be replaced immediately. Safe tool Worn out tool – immediate replacement
Ultimate protection Unior insulated VDE tools ensure ultimate protection even when used around live circuits with up to a 1000-volt potential. The utility of all tools is thoroughly verified by means of the impact strength, electrical, flame-retardancy, insulation adhesion and stamp tests, with each tool being tested individually. High-quality steel Insulated wrenches, pliers, shears, screwdrivers and other tools for working with electrical and other power installations are made of high-quality tool steel with added protection, and designed for simple and safe use. VDE regulations VDE insulated and tested according to the VDE regulations, Unior tools for work in electrically live environments meet the requirements of the internationally acknowledged European EN 60900 standard. Open end wrenches Ring wrenches Socket wrenches Inbus wrenches Sockets 3/8" Socket 1/2" Torque wrenches Combination pliers Waterpump pliers Diagonal and end cutters Flat and round pliers Strippers Cable shears Flat screwdrivers Crosstip screwdrivers Inbus screwdrivers Screwdrivers with TX profile Socket screwdrivers Voltage tester, cutters, saw, tweezers Sets in bag Sets in SOS 136 136 - 137 137 137 - 138 138 - 139 139 - 141 141 141 - 143 143 144 - 145 146 - 149 149 149 - 150 150 150 - 151 151 151 151 151 - 153 153 - 155 155 - 157 133 4
Page 1 and 2:
EN Catalogue 2013 - 2014 www.uniort
Page 3 and 4:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 5 and 6:
pany has been an ally to both amate
Page 7 and 8:
In the mid-1970s Unior began buildi
Page 9 and 10:
3. Flexible Production Processes Th
Page 11 and 12:
8. Ergonomic shape can be implement
Page 13 and 14:
Unior has implemented and certified
Page 15 and 16:
Effective for Points of Sale Unior
Page 17 and 18:
Save Space The well thought out pac
Page 19 and 20:
Special designed boxes The function
Page 21 and 22:
Legend of symbols used in catalogue
Page 23 and 24:
Long lifespan The wrenches are made
Page 25 and 26:
110/1CS Set of open end wrenches in
Page 27 and 28:
110/2CS Set of open end wrenches in
Page 29 and 30:
112/2 Open end wrench • material:
Page 31 and 32:
L B2 B1 A2 A1 618501 7/8" 303 34.1
Page 33 and 34:
120/2CB Set of combination wrenches
Page 35 and 36:
619505 125/1CT 3/8" - 7/8" / 9 1107
Page 37 and 38:
L B2 B1 A2 A1 611767 14 206 22 31.5
Page 39 and 40:
180/1CS Set of offset ring wrenches
Page 41 and 42:
183/2CB Set of offset open ring wre
Page 43 and 44:
170/2 Forged ratchet ring wrench
Page 45 and 46:
255/2 Hook wrench • material: chr
Page 47 and 48:
194/1B2 1/2" drive swivel with T -
Page 49 and 50:
176CS6 Set of double ended offset s
Page 51 and 52:
215/2CB Set of tubular box wrenches
Page 53 and 54:
193HXCS Set of hexagonal head screw
Page 55 and 56:
220/3 Hexagon wrench • material:
Page 57 and 58:
L1 L2 608511 2 102 18 7 608512 2.5
Page 59 and 60:
220/7TX Wrench with TX profile and
Page 61 and 62:
221AHXPB3 Set of hexagon wrenches w
Page 63 and 64:
205/2 Strap wrench • material: ch
Page 65 and 66:
Simple use The operation of the rat
Page 67 and 68:
188/2L6p Socket 1/4", long type •
Page 69 and 70:
188.3/2 Sliding T - handle 1/4" •
Page 71 and 72:
188BI12P16 Socket set 1/4" in metal
Page 73 and 74:
238/1 6p Socket 3/8" • material:
Page 75 and 76:
236/2HX Hexagonal screwdriver socke
Page 77 and 78:
238.1/1FBI Flexible reversible ratc
Page 79 and 80:
239A12P24 Socket set 3/8" in metal
Page 81 and 82: D1 D2 L T 609373 3/4" 26.8 24 38 14
Page 83 and 84: 192/2R Screwdriver socket 1/2" with
Page 85 and 86: 192/14INCH Hexagonal screwdriver so
Page 87 and 88: 190.3/1 Sliding T - handle 1/2" •
Page 89 and 90: 190H1 10 pieces set of socket clips
Page 91 and 92: 190BI6P43 Socket set 1/2" and 1/4"
Page 93 and 94: D1 D2 L T 610803 30 42 40 90 28 503
Page 95 and 96: 197MB4 Socket set 3/4" in metal box
Page 97 and 98: D2 D1 L T 612068 16 22 24 30 12 65
Page 99 and 100: D1 D2 L T 619147 12 20 24.8 80 14 1
Page 101 and 102: 231/4ATX Impact screwdriver socket
Page 103 and 104: 232.4/4 Impact extension bar 3/4"
Page 105 and 106: 233.8/4 Impact accessories 1" • m
Page 107 and 108: Ergonomic handles With ergonomic ha
Page 109 and 110: 405/4P Combination pliers material:
Page 111 and 112: 466/4G Heavy duty diagonal cutting
Page 113 and 114: 508/4P Long nose pliers with side c
Page 115 and 116: 447/1BIHPPST Set of waterpump plier
Page 117 and 118: 445/1BI Double groove joint pliers
Page 119 and 120: 503/4P Telephone pliers material: s
Page 121 and 122: 428/4 Crimp lever pliers jaws drop
Page 123 and 124: 423.6B Male spade terminals (20 pcs
Page 125 and 126: 534PLUS/1DP External lock rings pli
Page 127 and 128: L B A C 608725 225 54 25 24 419 608
Page 129 and 130: 434/3D Wheel and rack grip pliers j
Page 131: 515/1BI Revolving punch pliers mate
Page 135 and 136: Features of Unior’s screwdrivers
Page 137 and 138: 180/2VDEDPCB Set of insulated singl
Page 139 and 140: 239VDEDP6P10 Insulated socket set 3
Page 141 and 142: 190VDEDP6P13B Insulated socket set
Page 143 and 144: 420/1VDEDP Linemen`s pliers materia
Page 145 and 146: 466/1VDE Heavy duty diagonal cuttin
Page 147 and 148: 506/1VDE Long nose pliers with side
Page 149 and 150: 512/1VDEDP Long nose pliers with si
Page 151 and 152: 623VDETBI Double-crosstip (PZ) scre
Page 153 and 154: 1351VDE Plastic clamp plastic mater
Page 155 and 156: 905VDEBI Tool set VDE BI in bag 617
Page 157 and 158: 964VDE8A Set of insulated flat scre
Page 159 and 160: Numerous additional parts The range
Page 161 and 162: 442/1BIST Set of variable joint HYP
Page 163 and 164: 449/1PYTHON Waterpump box joint pli
Page 165 and 166: 483/6A Grip pipe wrench with smooth
Page 167 and 168: 486/6 Pipe roughing wrench • mate
Page 169 and 170: 355/6 Tube flaring tools • housin
Page 171 and 172: 484/6 Chain pipe wrenches • mater
Page 173 and 174: Secure cut Designed for a secure an
Page 175 and 176: 563R-PLUS/7DP Universal tin snips m
Page 177 and 178: 566R/7P Shape tin snips • materia
Page 179 and 180: 583/6 PVC pipe cutter • material:
Page 181 and 182: 586/6 Threaded rod cutter • made
Page 183 and 184:
596/6A Bolt cutter • material: cu
Page 185 and 186:
542.1/5 Spare spring for 542/4PR 60
Page 187 and 188:
Ergonomically designed handles The
Page 189 and 190:
605CR Flat screwdriver CR • blade
Page 191 and 192:
626CR Stubby crosstip (PH) screwdri
Page 193 and 194:
621CR Screwdriver CR with TX profil
Page 195 and 196:
607PB9TBI Set of screwdrivers TBI i
Page 197 and 198:
635Bits Reversible blade for bits f
Page 199 and 200:
6472C6,3 TX profile bit, 3 pcs set
Page 201 and 202:
6715E6,3 Bits adaptor E6, 3 (1/4")
Page 203 and 204:
17. Heat treatment (quenching and t
Page 205 and 206:
681/5 Puller with two sliding arms
Page 207 and 208:
687/5 Puller with five adjustable a
Page 209 and 210:
2051/4 Suspension compressor for sh
Page 211 and 212:
2210/2 Timing pulley puller • mat
Page 213 and 214:
Ergonomic design Their most common
Page 215 and 216:
810 Masons` hammer with wooden hand
Page 217 and 218:
819A Bumping hammer • non rebound
Page 219 and 220:
641/6 Pin punch • material: chrom
Page 221 and 222:
642LPB Set of letter steel punches
Page 223 and 224:
667/6AHS Jointing chisel with guard
Page 225 and 226:
Quality sheet steel Tool carriages,
Page 227 and 228:
920PLUS1 Tool carriage Europlus •
Page 229 and 230:
940EV6 Tool carriage Eurovision •
Page 231 and 232:
940E6 Tool carriage Eurostyle • l
Page 233 and 234:
940H3 Tool carriage Hercules • lo
Page 235 and 236:
610174 R4 490x66x90 Handle 940H1, H
Page 237 and 238:
946AC Work bench with cabinet • c
Page 239 and 240:
943P8 Support for modular work benc
Page 241 and 242:
942A11 Modular work bench 619040 94
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
938/3V Tool chest Eurostyle - 3 com
Page 249 and 250:
915/5 Tool box - 5 compartments •
Page 251 and 252:
948E1.1 Accessories for 948E1 • a
Page 253 and 254:
950/3V Wardrobe cabinet, 3 compartm
Page 255 and 256:
975 Metal stand for catalogue • m
Page 257 and 258:
980P2 Metal stand for two arms pull
Page 259 and 260:
1100 Large tool case for maintenanc
Page 261 and 262:
995DNL, 995DN1, 995DN1L Merchandise
Page 263 and 264:
995MD Modular holder for merchandis
Page 265 and 266:
995MD Modular holder for merchandis
Page 267 and 268:
998B Mobile merchandiser with full
Page 269 and 270:
1535 Pneumatic ratchet and socket s
Page 271 and 272:
1/4” 617793 Art. 1506 KZ7 3/8”
Page 273 and 274:
1562 Pneumatic reversible hammer 1/
Page 275 and 276:
1514 Stroke pneumatic hammer used f
Page 277 and 278:
1510 Pneumatic sander free speed 10
Page 279 and 280:
1517S Pneumatic angle sander free s
Page 281 and 282:
1500 Pneumatic filter regulator and
Page 283 and 284:
1507Z10 Coupling, male part outside
Page 285 and 286:
262 Dial torque wrench 1/2" double
Page 287 and 288:
264 Slipper torque wrench reversibl
Page 289 and 290:
272 External micrometer made of qua
Page 291 and 292:
1252 Alu - spirit level with magnet
Page 293 and 294:
1270 Mason's staffs special alumini
Page 295 and 296:
P7 472/4E Electronic flat nose plie
Page 297 and 298:
403B Set of electronic pliers in ca
Page 299 and 300:
2077/2BI Spring clip pliers materia
Page 301 and 302:
2081/3 Grip hose clamp pliers for s
Page 303 and 304:
2087 Flexible pick up tool with mag
Page 305 and 306:
1977/6 Oil-filter wrench used with
Page 307 and 308:
206/2 Chain wrench material: chrome
Page 309 and 310:
1921 Thin doe dolly material: speci
Page 311 and 312:
1940/2BI Trim pin remover material:
Page 313 and 314:
1943.1SQ Square steel wire for wind
Page 315 and 316:
2027/2 Hub and wheel drum puller ma
Page 317 and 318:
2033/2PB Disc spreader in plastic b
Page 319 and 320:
2041/2 Homokinetic joint puller The
Page 321 and 322:
2052/4 Compressor for shock absorbe
Page 323 and 324:
2177.04 Cable release tool P8 for r
Page 325 and 326:
2177.18 Cable release tool with asi
Page 327 and 328:
2177.35 Cable release tool with sim
Page 329 and 330:
194/2D1L T - handle spark plug wren
Page 331 and 332:
2206 Universal clutch aligner desig
Page 333 and 334:
2209 Alternator combination socket
Page 335 and 336:
2301SOS6 Set of automotive tools in
Page 337 and 338:
New advanced technology The use of
Page 339 and 340:
1681.1/4 Head set cup remover • m
Page 341 and 342:
1701/5 Bushing extractor set Tool i
Page 343 and 344:
1678/2BI Tools for bike frame mater
Page 345 and 346:
1695.1AR Pedal taps material: speci
Page 347 and 348:
1661/4 Crank puller The crank pulle
Page 349 and 350:
1671.7/2BI Truvativ® cartridge bot
Page 351 and 352:
1625/2 Tool for removing bottom bra
Page 353 and 354:
1670/2BI Freewheel remover The free
Page 355 and 356:
1640/1DP Chain rivet pliers materia
Page 357 and 358:
584/2POLLY Steel wire cutter materi
Page 359 and 360:
1632 Flat spoke wrench • material
Page 361 and 362:
1612/2A Hub cone wrench Made of qua
Page 363 and 364:
1693.1 Jaw with spring for 1693 Sui
Page 365 and 366:
1689 Wheel centering stand, for pro
Page 367 and 368:
1600BT Empty bag for 1600B A B 6172
Page 369 and 370:
1600SOS9 Bike tool set in SOS tool
Page 371 and 372:
Vices Clamps Saws Files Rasps Scrap
Page 373 and 374:
721.1/6 Swivel base for 721/6 and 7
Page 375 and 376:
705/5AMH Heavy duty engineering U c
Page 377 and 378:
760H1/2S Flat file with handle, hal
Page 379 and 380:
764H1/2S Three-square file with han
Page 381 and 382:
778/4 Screw extractor for unscrewin
Page 383 and 384:
1210 Flat cutting-off wheels, for s
Page 385 and 386:
1301.1/4 Nosepiece for blind-rivet
Page 387 and 388:
AS49 Universal sprayer loosens rust
Page 389 and 390:
Smart composition The composition o
Page 391 and 392:
964/2ASSOS Set of combinations wren
Page 393 and 394:
964/7SOS Set of BI and grip pliers
Page 395 and 396:
964/13ASOS Set of hexagonal screwdr
Page 397 and 398:
964/25SOS Set of sockets 3/8" in SO
Page 399 and 400:
964/32SOS Set of BI pliers and hamm
Page 401 and 402:
964ECO9 Set of TBI screwdrivers in
Page 403 and 404:
220/3 (3, 4, 5, 6, 8, 10, 12, 14, 1
Page 405 and 406:
1000G Tool set 631 (6 - 12) 640/6 (
Page 407 and 408:
190.3/1 (1/2") 190.1/1ABI (1/2") 19
Page 409 and 410:
1001F6 556B (160) 572R/7PR (280) 60
Page 411 and 412:
911N12P21 Socket set 1/2" in SOS to
Page 413 and 414:
1805 Safety shoes, normal antistati
Page 415 and 416:
1840 Cap Unior 621691 80 1850M T-sh
Page 417 and 418:
45/2 Bottle opener L B A 603886 13
Page 419 and 420:
KAT.OPR Catalogue workshop equipmen
Page 421 and 422:
1843OTR.KRO Label baby in car, Unig
Page 423 and 424:
1872.721 Rollwall 721/6 622566 1m x
Page 425 and 426:
PIC.IM5 Picture with wrenches 62261
Page 427 and 428:
Size Min. torque ISO 4762 ISO 4026
Page 429 and 430:
Conversion of geometric units measu
Page 431 and 432:
600812 213/6 62 600812 213/6 319 60
Page 433 and 434:
604692 6463TINC6,3 198 604693 6463T
Page 435 and 436:
608316 621E 296 608354 406/1BI 109
Page 437 and 438:
610809 197/1L6p 93 610810 197/1L6p
Page 439 and 440:
612890 433/4D 130 612891 433/4E 130
Page 441 and 442:
616729 441/4BI 162 616730 441/4G 11
Page 443 and 444:
618498 120/1 30 618499 120/1 30 618
Page 445 and 446:
619230 1932 310 619231 1933 310 619
Page 447 and 448:
620805 188/2F12p 66 620806 188/2F12
Page 449 and 450:
622597 940ES3A 229 622597 940ES3A 2
Page 451 and 452:
Cable release tool with pin head 21
Page 453 and 454:
Half-round file with handle, smooth
Page 455 and 456:
Oil can with flexible spout 1375/6
Page 457 and 458:
Set of cone wrenches 1612PB 360 Set
Page 459 and 460:
Socket set 1/2" in metal box 190BI6
Page 461 and 462:
Tool set CR in bag 905CR 410 Tool s
Page 463 and 464:
190BI6P22IN Socket set 1/2" in meta
Page 465 and 466:
423.3R Spade terminals (20 pcs) 122
Page 467 and 468:
639D Awl with round, double bent sm
Page 469 and 470:
964/9DSOS Set of screwdrivers TBI i
Page 471 and 472:
1668/2 Wrench for front sprocket nu
Page 473 and 474:
PLA.GIRL3 Poster with girl on carri
Page 475 and 476:
Guarantee UNIOR guarantees for all
show all

Hand tools catalogue - Unior

Create successful ePaper yourself

Delete template?

Save as template?