Hand tools catalogue - Unior

14
300/5
Tyre lever
material: chrome vanadium
forged
hardened and tempered
surface finish: zinc plated
drop forged, entirely hardened and tempered
320
P5
617661
L
200 111
601755 300 253
601756 400 452
601757 500 648
300/5A
Tyre lever
material: chrome vanadium
surface finish: zinc plated
drop forged, entirely hardened and tempered
P5
601758
L
537 992
300/5C
Tyre lever with handle
material: special tool steel
surface finish: chrome plated according to EN12540
ergonomic heavy duty double component handle
P6
L a x b
613103 320 1.1 x 13 252
613104 410 1.5 x 15 499
613105 610 1.5 x 21 837
300CCB
Tools for wheels, steering and hubs
Set of tyre levers with handle
G6
613106 300CCB
300/5C (320, 410, 610)
3 878
2051/4
Suspension compressor for shock absorber springs
How it works:
1. Select the appropriate cup for your spring.
2. Place the remover on the spring.
3. START compressing the shock absorber spring.
This Unior professional tool, under article number 2051, is intended for the removal of
car shock absorbers and is mainly used to compress the springs in MacPherson struts.
Since the number of versions of the MacPherson strut is always increasing, the tool set
contains three different pairs of grippers that almost completely cover the range of
different MacPherson struts.
The tool set also includes a spacer bar for conical springs, which increases the
usefulness of the Shock Absorber Remover.
Development of this tool took safety into account as the large forces involved in
removing shock absorbers may present a risk of injury to the user.
For this reason, all grippers in the set feature enlarged grip edges to firmly grip the
spring in the tool thus prevent any possibility of slipping, which could injure the tool
user. The recomended load for the tool is 9000 N.
The maximum load for the tool is up to 37000 N.
The tool is supplied in a durable PVC case that enables easier and safer
transportation. in set 2 cups 80 - 115, 2 cups 110 - 150 in 2 cups 140 - 195
P7
L D
619279 300 21 80 - 195 14600