Hand tools catalogue - Unior

1695.1AR
Pedal taps
material: special tool steel
Precise design and hardened to stay sharp. 1965.1AR is used for cutting
new right threads before inserting right pedal thread inserts 1695.3A.
Pedal tap 1695.1AR removes the old thread before making a new one,
so no other tap is needed.
M L
616553 5/8" x 24 TPI 85,5 80
1695.3A
Pedal thread inserts, 10 pieces set, right
material: special tool steel
Inner dimension: 9/16 x 20 TPI
Outer dimension: 5/8 x 24 TPI
Pedal thread inserts are used to replace damaged threads in cranks. They are
used together with appropriate pedal taps and are available in 10 pcs sets.
M1 M2 L
616551 5/8 x 24 9/16 x 20 16,3 49
1695.4A
Pedal thread inserts, 10 pieces set, left
material: special tool steel
Inner dimension: 9/16 x 20 TPI
Outer dimension: 5/8 x 24 TPI
Pedal thread inserts are used to replace damaged threads in cranks. They are
used together with appropriate pedal taps and are available in 10 pcs sets.
M1 M2 L
616552 5/8L x 24 9/16L x 20 16,3 50
1609.1/2
Wrench for Shimano plastic bolt
Tool is used for removal and installation of Shimano plastic bolts that
are used on the Hollowtech II cranksets
Tool can be used by hand or with help of wrench size 13 mm
Strong magnet in the back of the wrench, enables the tool to be stored
on a convenient place.
A B D1 D2 D3 R1 R1
623120$ 4 1,85 32 15,4 13 2,3 2,5 33
1608/2BI
Bottom bracket tool
material: special tool steel, hardened and tempered
surface finish: chrome plated according to EN12540
ergonomic heavy duty double component handle
This tool is made for the installation and removal of bottom brackets XTR ®
and Dura Ace and enables easy work without slippage and damage
L A S D
615534 350 4 3,8 37,3 296
1609/2BI
Lockring wrench
The wrench is used to remove and install bottom brackets Shimano ®
XTR - FC - M960, XT FC-M 760, SAINT FC -M 800, RACE FACE ® X-TYPE,
FSA ® MEGAE X, Truativ ® Giga X- Pipe without slippage or damage.
The wrench has an additional feature to loosen the plastic pin of the
bottom bracket.
material: special tool steel, hardened and tempered
surface finish: chrome plated according to EN12540
ergonomic heavy duty double component handle
L A B D C
615536 350 4 66 42,7 2,8 316
Tools for drive
15
345