Hand tools catalogue - Unior

1701/5
Bushing extractor set
Tool is used for removing old bushings from the rear shock.
With use of this tool and a vice, removal of the bushing is incredibly easy.
Tool supports bushings removal with diameter 12 mm and diameter 12,7 mm.
D1 D2 D3 D4 D5 L
623006$ 12 - 12,7 11,8 13,9 12,5 14,9 22 76 310
1702
Fork seal installation tool
Tool is intended for installation of fork dust seals on front fork suspension. Based
on the seal dimension, appropriate version of the tool is used - 32mm, 34mm,
35mm/36mm or 40mm. Tool is made from firm plastic and does not damage the
seal or the fork housing.
623024$ 32 84
623025$ 34 92
623026$ 35/36 100
623027$ 40 123
1696
Fork threading tool
material: special tool steel
ergonomic heavy duty double component handle
The fork threading tool is designed for cutting new threads and for chasing existing
threads on steerer tubes that are not chromed. Made from quality steel and
designated for long life use. Use the tool on the steerer tube under 90° angle. When
cutting threads, use cutting grease. The ergonomic design of the handle ensures
optimal force transmission and effective work.
M L A B
616074 1" x 24 tpi 370 31 84 1100
619633 1.1/8" x 24 tpi 370 31 84 1130
1696.1
Steerer cutting guide
material: special tool steel
to be used with tool 1696
M D A
616075 1" x 24 tpi 55 15 162
1696.2
Steerer cutting guide
material: special tool steel
to be used with tool 1696
M D A
617898 1.1/8" x 24 tpi 55 16 155
Tools for frame and fork
15
341