Hand tools catalogue - Unior

15
1672/2
Adjustable cup wrench, for older bottom bracket
models
material: special tool steel, hardened and tempered
The wrench is used for installing and removing of older bottom
brackets. The wrench fits perfectly in the hand while the slim body and
gap form enable quick and efficient installation and removal of older
types of bottom brackets. The length of the key is 204 mm.
L B1 B2 A C D
618414 204 27,3 31 2,5 3 16,5 113
Ratcheting bottom bracket wrench
346
Tools for drive
1621/1BI
material: special tool steel
ergonomic heavy duty double component handle
75 - teeth
The design of the Unior ratcheting hub nut wrench enables working in hard
to reach places. New shape enables higher torque, reduces physical effort
and ensures a longer working life of the tool. Maximum torque is assured by
the shape of the handle. A perfect fit to the hand makes it comfortable to
work with.
The ratcheting nut wrench is made for tightening and loosening nuts of 14
and 15 mm dimensions. Special pins prevent the loss of the socket.
Interchangeable sockets: 14 mm and 15 mm
L A B
615248 14 x 15 260 71 35 380
1621/1ABI
Ratcheting bottom bracket wrench
material: special tool steel
75 - teeth
ergonomic heavy duty double component handle
The ratchet has exchangeable screwdriver socket HX8 mm and socket
14 mm. Both are used for nuts on the crank.
L A B
616288 14 8 260 91 35 381
1607/4
Bottom bracket shell installation tool
material: special tool steel
surface finish: blacken to standard DIN 50938
This tool is used for the installation and removal of the bottom bracket
shell of 35, 8 mm and 36, 3 mm. It is made of quality steel with heat
treatment and surface protection. The advantage of the tool is that it
prevents slipping off the shell.
A B D1 D2 D3
616293 220 290 36,5 32 54 1750