Hand tools catalogue - Unior

1671.7/2BI
Truvativ® cartridge bottom brackets tools with handle
material: special tool steel, hardened and tempered
The tool is composed of a wrench, screw with nut and handle. To use, put the
wrench into the bottom bracket nut, so that the screw is inserted into the bottom
bracket. This prevents the wrench from slipping and damaging the bottom bracket
nut when applying pressure. Your work is made easy by the 350 mm long handle
with a two-component ergonomic sleeve. An additional part on the screw is a 19
mm AF to be used with a 19 mm wrench and for torque checking with a torque
wrench. The wrench can also be used independently with a 19 mm wrench without
the screw with nut and handle. The tool comes with an adjustable sleeve 13.9 mm.
L D1 D2 C1 C2 A B
620206 335 10,8 13,9 89 5 37,4 4,0 677
1671.8/2BI
Cartridge bottom bracket tool
material: special tool steel, hardened and tempered
ergonomic heavy duty double component handle
The double threaded screw enables you to use this tool for Shimano standard
bottom brackets as well as for Shimano Octalink and Truvativ bottom brackets.
It is composed of wrench, product no. 1671.1, screw with nut and handle.
This tools enables us, to fix the wrench into the axle with additional screw that
comes with the tool. This prevents the wrench from slipping and damaging the
bottom bracket nut. Work is made easy by the 350 mm long handle with the twocomponent
ergonomic sleeve. The same procedure can be used for installation.
The screw is 24 mm AF and is for use with a 24 mm wrench, and for torque
checking with torque wrench. The handle can be taken down if necessary.
623087$ 490
1697
Bottom bracket tapping tools (BSA)
material: special tool steel
This tool is used for tapping the threads in the bottom bracket shell of a
frame. 1697 supports the BSA bottom bracket standard. When cutting
left and right thread insert the tool at one time parallel from both sides
into the bottom bracket shell of a frame. Always use cutting oil when
using this tool. The design enables effective and precise work
ergonomic heavy duty double component handle
M A B1 B2
616076 1.3/8 x 24 tpi 335 145 180 2200
1697.1
Spare taps for 1697 (BSA)
material: special tool steel
left and right taps available in set for article 1697
617310 1.3/8 x 24 tpi ( BSA)
A
18 117
Tools for drive
15
349