Basic Operations and Setups - Sharp & Casio Cash Registers
Basic Operations and Setups - Sharp & Casio Cash Registers
Basic Operations and Setups - Sharp & Casio Cash Registers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8. Install receipt/journal paper.<br />
Important!<br />
Never operate the cash register without paper.<br />
It can damage the printer.<br />
CAL<br />
REG<br />
OFF<br />
X<br />
Z 1<br />
Use a mode key to set the<br />
mode switch to REG<br />
RF<br />
PGM<br />
position.<br />
2 Remove the printer cover.<br />
3<br />
Cut off the leading end of<br />
the paper so it is even.<br />
4<br />
Ensuring the paper is being<br />
fed from the bottom of the<br />
roll, lower the roll into the<br />
space behind the printer.<br />
1<br />
2<br />
Roll paper spindle<br />
Paper inlet<br />
To load 1-ply paper for printing of receipts<br />
5<br />
Work the paper roll gently<br />
between the two spindles<br />
so that they slip into the<br />
center hubs of the roll.<br />
6<br />
Insert paper to the paper<br />
inlet.<br />
7<br />
Press the f key until<br />
about 20 cm to 30 cm of<br />
paper is fed from the<br />
printer.<br />
8<br />
Replace the printer cover,<br />
passing the leading end of<br />
the paper through the cutter<br />
slot. Tear off the excess<br />
paper.<br />
9<br />
www.cashregisters.net<br />
Getting Started
Change language