Basic Operations and Setups - Sharp & Casio Cash Registers

More documents

Recommendations

Info

Troubleshooting 90 In case of power failure If the power supply to the cash register is cut by a power failure or any other reason, simply wait for power to be restored. The details of any on-going transaction as well as all sales data in memory are protected by the memory backup batteries. • Power failure during a registration The subtotal for items registered up to the power failure is retained in memory. You will be able to continue with the registration when power is restored. • Power failure during printing a read/reset report The data already printed before the power failure is retained in memory. You will be able to issue a report when power is restored. • Power failure during printing of a receipt and the journal Printing will resume after power is restored. A line that was being printed when the power failure occurred is printed in full. • Other The power failure symbol is printed and any item that was being printed when the power failure occurred is reprinted in full. Important! Once receipt/journal printing or printing of a report starts, it can be stopped only by interruption of power to the cash register. When the L sign appears on the display About the low battery indicator… The following shows the low battery indicator. l ~00 If this indicator appears when you switch the cash register on, it can mean one of three things: • No memory backup batteries are loaded in the cash register. • The power of the batteries loaded in the unit is below a certain level. • The batteries loaded in the unit are dead. To clear this sign, press C key. Important! Whenever the low battery indicator appears on the display, load a set of three new batteries as soon as possible. If there is a power failure or you unplug the cash register when this indicator appears, you will lose all of your sales data and settings. BE SURE TO KEEP THE POWER CORD OF THE CASH REGISTER PLUGGED IN WHENEVER YOU REPLACE THE BATTERIES. www.cashregisters.net
User Maintenance and Options To replace the ink ribbon 1 Remove the printer cover. 2 Cut the journal paper and feed the remaining paper from the printer. 3 Remove the inner cover. 4 Push on the right side of the ribbon cassette where marked with the word "PUSH", to release it. Knob 5 Load a new ink ribbon cassette into the unit. 6 Turn the knob on the left side of the cassette to take up any slack in the ribbon. 7 Reload the roll paper and replace the printer cover . Important! Use only the ERC-40P ribbon (purple). Other types of ink ribbons can damage the printer. Never try to extend the life of an ink ribbon by replenishing the ink. Once an ink ribbon is in place, press the B key to test for correct operation. 91 www.cashregisters.net Troubleshooting and User Maintenance
Page 1 and 2:
ELECTRONIC CASH REGISTER CE-250 THA
Page 3 and 4:
Important! Before you do anything,
Page 5 and 6:
Registering returned goods in the R
Page 7 and 8:
3. Install the three memory backup
Page 9 and 10:
8. Install receipt/journal paper. I
Page 11 and 12:
8. Install receipt/journal paper. (
Page 13 and 14:
12. Tax table programming Programmi
Page 15 and 16:
15 Getting Started IDAHO 3% 0 1 1 1
Page 17 and 18:
17 Getting Started TEXAS DALLAS 6%
Page 19 and 20:
Mode switch Use the mode keys to ch
Page 21 and 22:
1 Amount/Quantity This part of the
Page 23 and 24:
E Department shift key d Press this
Page 25 and 26:
How to use your cash register The f
Page 27 and 28:
Preparing and using department keys
Page 29 and 30:
Programming department keys To prog
Page 31 and 32:
Preparing and using PLUs This secti
Page 33 and 34:
PLU split sales of packaged item Un
Page 35 and 36:
Registering discounts The following
Page 37 and 38:
Registering reductions The followin
Page 39 and 40: Shifting taxable 1/2 status of an i
Page 41 and 42: Registering returned goods in the R
Page 43 and 44: Registering money received on accou
Page 45 and 46: To correct an item you input and re
Page 47 and 48: Printing the daily sales reset repo
Page 49 and 50: About post-finalization receipt You
Page 51 and 52: 51 Convenient Operations and Setups
Page 53 and 54: Programming to clerk You can progra
Page 55 and 56: 55 Convenient Operations and Setups
Page 57 and 58: Programming department key descript
Page 59 and 60: Programming function key descriptor
Page 61 and 62: Entering characters by code Charact
Page 63 and 64: Individual feature programming With
Page 65 and 66: Individual feature programming With
Page 67 and 68: Multiple item sale Unit price $2.00
Page 69 and 70: Percent key feature programming You
Page 71 and 72: Registering manual tax You can prog
Page 73 and 74: Registering foreign currency 1) Ful
Page 75 and 76: Other function key feature programm
Page 77 and 78: Example 2 (Memory recall) Unit pric
Page 79 and 80: To print the financial read report
Page 81 and 82: To print the PLU/subdepartment read
Page 83 and 84: To print the periodic 1/2 sales rea
Page 85 and 86: To print key descriptor, name, mess
Page 87 and 88: To print the PLU program CAL REG OF
Page 89: Troubleshooting When the register d
Page 93 and 94: User Maintenance and Options To rep
Page 95 and 96: Index A B C D E Amount tender compu
Page 97 and 98: LIMITED WARRANTY: ELECTRONIC CASH R
show all

Basic Operations and Setups - Sharp & Casio Cash Registers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?