Polycom UC Software Administrators' Guide - 4.1.0

More documents

Recommendations

Info

Chapter 13: Configuration Parameters Parameter Permitted Values Default call.singleKeyPressConference 1 0 or 1 0 If set to 1, the conference will be setup after a user presses the Conference soft key or Conference key the first time. Also, all sound effects (dial tone, DTMF tone while dialing and ringing back) are heard by all existing participants in the conference. If set to 0, sound effects are only heard by conference initiator (original behavior). Note: This feature is supported only for SoundPoint IP 550, 560, and 650. For all others, set to 0. call.stickyAutoLineSeize 1 0 or 1 0 If set to 1, the phone uses sticky line seize behavior. This will help with features that need a second call object to work with. The phone will attempt to initiate a new outgoing call on the same SIP line that is currently in focus on the LCD (this was the behavior in SIP 1.6.5). Dialing through the call list when there is no active call will use the line index for the previous call. Dialing through the call list when there is an active call will use the current active call line index. Dialing through the contact directory will use the current active call line index. If set to 0, the feature is disabled (this was the behavior in SIP 1.6.6). Dialing through the call list will use the line index for the previous call. Dialing through the contact directory will use a random line index. Note: This may fail due to glare issues in which case the phone may select a different available line for the call. call.stickyAutoLineSeize.onHookDialing 1 0 or 1 0 If call.stickyAutoLineSeize is set to 1, this parameter has no effect. The regular stickyAutoLineSeize behavior is followed. If call.stickyAutoLineSeize is set to 0 and this parameter is set to 1, this overrides the stickyAutoLineSeize behavior for hot dial only. (Any new call scenario seizes the next available line.) If call.stickyAutoLineSeize is set to 0 and this parameter is set to 0, there is no difference between hot dial and new call scenarios. Note: A hot dial occurs on the line which is currently in the call appearance. Any new call scenario seizes the next available line. call.transferOnConferenceEnd 1 0 or 1 1 The behavior when the conference host exits a conference. If 0, all parties are disconnected when the conference host exits the conference. If 1, the other parties are left connected when the host exits the conference (the host performs an attended transfer to the other parties, this is the old behavior). call.transfer.blindPreferred 1 0 or 1 0 SoundPoint IP 321, 331, and 335 only. If 1, the blind transfer is the default mode. The Normal soft key is available to switch to a consultative transfer. If 0, the consultative transfer is the default mode. The Blind soft key is available to switch to a blind transfer. call.urlModeDialing 1 0 or 1 0 If 0, URL dialing is disabled. If 1, URL dialing is enabled. Note: URL dialing is supported on SoundPoint IP 321/331/335 phones for unregistered lines only. 1 Change causes phone to restart or reboot. 421
Polycom ® UC Software Administrators’ Guide The call lists (or call log) parameter is supported only on VVX 500 and 1500 phones and SpectraLink handsets. Table 13-9: Call List (Call Log) Parameters Parameter Permitted Values Default callLists.collapseDuplicates 0 or 1 1 If 0, all calls are archived and presented in the call lists. If 1, consecutive incomplete between the same party in the same direction (outgoing/incoming) are collapsed into one record with the most recent call displaying. callLists.logConsulationCalls 0 or 1 0 If 1, all consultation calls are logged. (Calls made to a third party—while the original party is on hold— when settings up a conference call are called consultation calls.) If 0, consultation calls are not logged. callLists.size 10 to 99 99 The maximum number of retained records of each type (incoming, outgoing, and missed). When the maximum number is reached, new records will overwrite existing records. You can clear the list using the phone’s menu system. If you want to prevent the records from uploading to the provisioning server, enter a false URL in the CALL_LISTS_DIRECTORY field in the master configuration file. callLists.writeDelay.journal 1 to 600 5 The delay (in seconds) before changes due to an in-progress call are flushed to the file system as a journal. callLists.writeDelay.terminated 10 to 600 60 The minimum period between writing out the complete XML file to the local file system and, optionally, to the provisioning server. The parameters—also known as device settings—contain default values that you can use to configure basic settings for multiple phones. 422 Web Info: Default Device Parameter Values The default values for the parameters are set at the factory when the phones are shipped. For a list of the default values, see the latest Shipping Configuration Notice. Polycom provides a global device.set parameter that you can enable for software installation and changes to device parameters. Once you have completed the software installation or made
Page 1 and 2:
ADMINISTRATORS’ GUIDE Polycom UC
Page 4 and 5:
Contents About This Guide .........
Page 6 and 7:
Contents Upgrading Polycom UC Softw
Page 8 and 9:
Contents Configuring the Phone’s
Page 10 and 11:
Contents Setting Up Microsoft Lync
Page 12 and 13:
Contents Reading an Application Log
Page 14 and 15:
Contents .........................
Page 16:
Contents Third Party Call Control .
Page 19 and 20:
Polycom ® UC Software Administrato
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 30:
Part I: Getting Started Part I give
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 40 and 41:
Chapter 2: The Polycom ® UC Softwa
Page 42 and 43:
Figure 2-1: Polycom Wired Phones in
Page 44 and 45:
Chapter 2: The Polycom ® UC Softwa
Page 46:
What are the Resource Files? Chapte
Page 50 and 51:
Chapter 3: Setting Up Your Device N
Page 52 and 53:
Chapter 3: Setting Up CDP Compatib
Page 54 and 55:
Parameter DHCP Option DHCP DHCP INF
Page 56 and 57:
Chapter 3: Setting Up After you con
Page 58 and 59:
Chapter 3: Setting Up Quick Setup
Page 60 and 61:
You can update the network configur
Page 62 and 63:
Name Possible Values EM Power Enabl
Page 64 and 65:
DHCP Menu Tip: Changing the Default
Page 66 and 67:
Name Possible Values Subnet Mask Do
Page 68 and 69:
Name Possible Values VLAN Discovery
Page 70 and 71:
Name Possible Values IP Address Dot
Page 72 and 73:
WPA2-Enterprise Menu You can modify
Page 74 and 75:
USBNet Menu Currently the USBNet me
Page 76 and 77:
Name Possible Values Clear Custom D
Page 78:
Name Possible Values Facility 0 to
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 118:
Part III: Configuring the Phone Fea
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 312 and 313:
Chapter 9: Setting Up Phone Video F
Page 314 and 315:
Table 9-3: Video Camera Parameters
Page 316 and 317:
Table 9-6: H.323 Protocol Parameter
Page 318 and 319:
Page 320:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 350:
Part IV: Troubleshooting and Mainta
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388: Polycom ® UC Software Administrato
Page 418: Part V: Polycom ® UC Software Refe
Page 437: Polycom ® UC Software Administrato
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
Page 627 and 628:
POLYCOM, INC. APPLICATION PROGRAMMI
Page 629:
LOSS) ARISING OUT OF THE USE OR INA
show all

Polycom UC Software Administrators' Guide - 4.1.0

Create successful ePaper yourself

Delete template?

Save as template?