Polycom UC Software Administrators' Guide - 4.1.0

Chapter 4: Setting Up the Provisioning Server
specify the phone product name, phone model number, or phone part number, and rename the
legacy phone configuration files.
To get the phone product name, phone model number, or phone part number for a phone, see
Product, Model, and Part Number Mapping.
You must rename the sip.ld, sip.cfg, and phone1.cfg from a previous 2.1.x distribution that is
compatible with SoundPoint IP 300 and 500 phones, or a previous 3.1.y distribution that is
compatible with SoundPoint IP 301, 501, 600, 601, and SoundStation IP 4000 phones, or a
previous 3.2.z distribution that is compatible with SoundPoint IP 430 phones, or a previous
3.3.w distribution that is compatible with SoundPoint IP 320 and 330 phones, or a previous 4.0.v
distribution that is compatible with SoundPoint IP 670 and SoundStation IP 7000 phones.
Supported Software for Legacy Phones
The SoundPoint IP 300 and 500 phones will be supported on the latest maintenance patch release
of the SIP 2.1 software stream—currently SIP 2.1.4. Any critical issues that affect SoundPoint IP
300 and 500 phones will be addressed by a maintenance patch on this stream until the End of Life
date for these products. Phones should be upgraded to BootROM 4.0.0 for these changes to be
effective.
The SoundPoint IP 301, 501, 600, and 601, and the SoundStation IP 4000 phones will be
supported on the latest maintenance patch release of the SIP 3.1 software stream—currently SIP
3.1.7 . Any critical issues that affect SoundPoint IP 300 and 500 phones will be addressed by a
maintenance patch on this stream until the End of Life date for these products. Phones should be
upgraded to BootROM 4.0.0 or later for these changes to be effective.
The SoundPoint IP 430 phone will be supported on the latest maintenance patch release of the SIP
3.2 software stream—currently SIP 3.2.4RevB. Any critical issues that affect SoundPoint IP 430
phones will be addressed by a maintenance patch on this stream until the End of Life date for
these products. Phones should be upgraded to BootROM 4.2.2 for these changes to be effective.
The SoundPoint IP 320 and 330 phones will be supported on the latest maintenance patch release
of the UC Software 3.3.1 software stream—currently UC Software 3.3.1RevF. Any critical issues
that affect SoundPoint IP 320 and 330 phones will be addressed by a maintenance patch on this
stream until the End of Life date for these products. Phones should be upgraded to BootROM 4.0.0
for these changes to be effective.
The SoundPoint IP 670 and SoundStation IP 7000 are supported by UC Software 4.0.x - currently
4.0.2B - and are not supported by UC Software 4.1.x or later. Critical issues that affect these
phones will be addressed by a maintenance patch on the 4.0.x stream until the End of Life date for
these products. Phones should be upgraded to BootROM 4.0.0 for these changes to be effective.
If you are upgrading legacy phones to UC Software 4.0.x, Polycom recommends modifying your
configuration files in the following way.
To upgrade legacy phones to UCS 4.1.x:
1 Do one of the following steps:
73