G3 Series PROFIBUS-DP Technical Manual - ASCO Numatics
G3 Series PROFIBUS-DP Technical Manual - ASCO Numatics
G3 Series PROFIBUS-DP Technical Manual - ASCO Numatics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Advanced Settings - Brightness<br />
ADVANCED<br />
SETTINGS<br />
ADVANCED MENU<br />
SET BRIGHTNESS<br />
SET BRIGHTNESS<br />
LOW<br />
SET BRIGHTNESS<br />
MEDIUM<br />
SET BRIGHTNESS<br />
HIGH<br />
SET BRIGHTNESS<br />
RETURN<br />
NOTE!<br />
<strong>G3</strong> <strong>Series</strong> <strong>PROFIBUS</strong>‐<strong>DP</strong> <strong>Technical</strong><br />
<strong>Manual</strong><br />
Brightness Settings<br />
1. Press the SET button to enter the ADVANCED SETTINGS menu.<br />
2. Press the NEXT button to scroll to the CONFIG MENU / SET<br />
BRIGHTNESS.<br />
Press the SET button to enter the CONFIG MENU / SET BRIGHTNESS.<br />
3. Press the NEXT button to scroll the choices for the desired brightness of the<br />
LCD display for all modules on the <strong>G3</strong> system.<br />
a. LOW<br />
b. MEDIUM<br />
c. HIGH (Factory Default)<br />
d. RETURN (this will return you to the SET FAULT/IDLE menu)<br />
Press the SET button to confirm your choice.<br />
The changes will take effect immediately.<br />
This a global setting that affects all modules<br />
Each module, however, has its own setting if different settings<br />
are required.<br />
TD<strong>G3</strong>PTTM1-2EN 02/09<br />
Subject to change without notice<br />
www.numatics.com/g3<br />
Page 21